- Class Overview
-
Syllabus & Downloads
-
Introduction 4 min
-
Low Power Operations 9 min
-
PIC32CM LE00 Curiosity Pro Current Measurement Setup 5 min
-
LAB1: Use the Default MCC Project and Measure the Baseline Current 4 min
- Active Mode
-
Active Mode Light Sensor Project 31 min
-
Active Mode System Block Diagram 3 min
-
LAB2: Create Light Sensor Project and Measure Current 6 min
- Standby Mode
-
Add Standby Mode 21 min
-
LAB3: Add Standby Mode and Measure the Current Consumption 10 min
- Sleepwalking
-
Sleepwalking Light Sensor Project 35 min
-
LAB4: Sleepwalking Light Sensor Project and Summary 9 min
- Complete Recording
-
26043 MCU3 (137 min)
- Feedback and Discussion
-
We need your feedback
26043 MCU3 - Low-Power Design with Microchip's Arm®-based Cortex®-M Microcontrollers: Essential Techniques (August 2026)
Low-Power Design with Microchip's Arm®-based Cortex®-M Microcontrollers: Essential Techniques
In this class, you will learn essential techniques for low-power applications design with Microchip's ARM®-based Cortex®-M microcontrollers including: sleep modes, automatic clock request systems, power domains / regulator selection, and inter-peripheral communication / triggering using the event system. In the hands-on labs in this class you will start with an active mode light sensor application example (no low power techniques utilized) and use MCC/Harmony to progressively apply microcontroller sleep modes, power management systems, and peripheral automation of tasks to reduce the power consumption. At each step along the way you will measure and observe the reduction in power consumption obtained from utilizing each low power technique.
-
Objective 1:Explain the key architectural features of low-power PIC32CM LE00 MCUs, including power modes, clock gating, and peripheral optimizations. Gain knowledge of techniques like dynamic voltage scaling, sleep modes, and adaptive clock management to reduce energy consumption.
-
Objective 2:Use processor sleep modes and automation of tasks while the processor is asleep to reduce the power consumption.
-
Objective 3:Capture and visualize traces of the microcontroller current consumption using the MPLAB Data Visualizer.
Prerequisites:
Prior knowledge of developing embedded systems with microcontrollers in C, MCC/Harmony and basic experience with the MPLAB Extensions for VSCode.