Microchip Technical Forum Motor Control, Power Conversion & Analog

Reset

This catalog holds material which will help attendees of our Forum Event Motor Control, Power Conversion & Analog to prepare for the sessions they book. Session Recordings are only accessible for Linz attendees.

Details about the Forum Event: Motor Control, Power Conversion & Analog

Conference Guide and Tuesday Evening Open Lab

TN_Analog TN_Power Conversion TN_Motor Control 2023

(LS03) - High-Voltage E-Fuse Technology Demonstrator

This class discusses the benefits of SiC E-Fuse technology which combines circuit protection, control, configurability, and diagnostic features into a single solution for high-voltage applications. (Sept 2023)

SiC- Based High Voltage E-Fuse Demonstrator

This slide deck is a short introduction of the Silicon Carbide (SiC) E-Fuse Reference Design (May 2023)

mSiC™ MOSFETs, MA Family - Best in Class Ruggedness and Reliability

This course covers the MA SiC MOSFET Family which provides high levels of ruggedness and reliability. (September 2023)

Motor Control Workshop using dsPIC® Digital Signal Controllers (DSC) Dual Core Devices

This workshop class is for those aiming for a clear understanding of 3-phase brushless permanent magnet motors and their control at the fundamental level. (May 2022)

TN_Motor Control 2022 LV_3

Motor Control Rapid Prototyping

Model-Based Development With Commercial and Open Source tools for16 and 32-bit MCUs. (Dec 2020)

TN_Motor Control 2020 LV_3

Software Tools to Simplify Motor Control Development and Debugging: motorBench®

motorBench® Development Suite is a comprehensive software development tool for Field Oriented Motor Control (FOC). (Dec 2020)

TN_Motor Control TN_Embedded Software 2020 LV_3

Using X2CScope to Simplify Motor Control Development and Debugging

X2CScope is a software tool that can greatly simplify the process of motor control development and debugging. (May 2021)

TN_Motor Control 2021 TN_Embedded Software LV_5

Visual Debugging with MPLAB® Data Visualizer

In this class, we’ll use MPLAB® Data Visualizer as a plugin to MPLAB X IDE to plot real-time data from PIC®, AVR® and SAM MCUs using the Curiosity Nano Platform, and Xplained Pro platforms. (Feb 2021)

2021 TN_Embedded Software LV_1 TT_Tools

Analog Power Meets Digital: Using Mixed Signal MCUs to Build Advanced SMPS Topologies and Applications

Using Mixed Signal MCUs to build advanced SMPS topologies and applications. (Nov 2021)

TN_Analog TN_Microcontroller System 2021 TT_MU TN_Sensor Systems LV_3

Mindi™ Analog Simulator Applications

This course is intended to enhance your understanding of your circuits and systems by using analog simulations created with the MPLAB® Mindi™ Simulator. (Updated Oct 2024)

TN_Analog 2020 LV_3

Creating Unique Digital and Analog Functionality by Interconnecting Core Independent Peripherals (CIPs).

This class will cover in detail a number of applications that utilize multiple Core Independent Peripherals (CIPs) to simplify the design of different circuits. (Updated Nov 2021)

TN_Analog TN_Core Independant Periph 2020 LV_3

Designing with Integrated Analog On PIC® and AVR® MCUs

This training demonstrates how a few applications having standalone analog and discrete components (Op-Amp, ADC, DAC, Voltage reference, and Analog Comparator) can be designed and optimized using PIC® and AVR® microcontrollers with integrated analog peripherals. (Nov 2022)

TA_Experts TN_Analog TN_Microcontroller System 2022 LV_3

Mastering Analog Simulations Using the MPLAB® Mindi™ Analog Simulator

This class will teach you how to use the MPLAB® Mindi™ Analog Simulator to analyze your design and perform trade-offs. (Dec 2020)

TN_Analog TN_Embedded Software 2020 LV_3 TT_Tools

Signal Conditioning in the Analogue Domain

Precision analog signal conditioning – A practical design study with a focus on the analogue domain. (Nov 2021)

TN_Analog 2021 TN_Sensor Systems LV_3

Creating a Digital Power Supply from Scratch

This class covers the entire process of creating a digital power supply. (Nov 2021)

TN_Power Conversion 2021 TT_MU

MPLAB® SiC Power Simulator

This slide deck is a short intro to our MPLAB® SiC Power Simulator (May 2023)

TN_Power Conversion TN_Embedded Software TN_SiC TT_Tools

Overview of Hybrid Power Control Using the MCP1911x

An overview of hybrid power controllers using the MCP1911x. (June 2022)

TN_Power Conversion 2022 LV_1

Power Factor Correction (PFC) Basics and Demonstration

This course covers Power Factor Correction (PFC) Basics and shows a demo. (September 2023)

TN_Power Conversion TN_SiC

邁向低功耗藍牙（BLE）的第一步

本課程將重點介紹設計支援BLE的設備所需的基礎概念，並討論連接和數據傳輸

전자기 적합성(EMC) 1부 – 기본 개념과 정의

EMC의 개념, EMC 결합 및 전파 방식, 이진 신호의 특성, 방사 모드 및 이진 신호와의 상호작용에 대해 학습합니다. (2023년 11월)

传感器 III : 模拟传感器和混合信号系统的校准技术

这个课程将深入教授和说明校准技术，以尽量减少在不同真实的模拟系统中的固有硬件增益和失调误差。

Microchip ARM® Cortex® 微控制器编程入门

学习在Microchip SAM ARM® Cortex® M0+, M23 and M4 微控制器上编写程序以及如何使用外设。

非易失性存储器可靠性策略

本课程涵盖了 EEPROM 和 NOR Flash存储器如何运行、磨损和失效，以及在应用中最大限度地提高存储器件的性能和可靠性的几种策略。

MCP6V51ゼロドリフトオペアンプによるハイサイド電流センシング

最大45Vのシステム電圧に対するハイサイド電流検出設計の実装について。

기본 네트워크 관리

이더넷 스위치의 기본 개념을 소개하고 주요 기능을 살펴 보겠습니다. (May 2023).

MiWi™ 메쉬 네트워크 구현

이 강좌는 IEEE® 802.15.4 프로토콜을 사용하여 MiWi™ 메쉬 네트워크를 구축하는 데 도움을 줍니다.

이더넷 스위치 기초

이더넷 스위치 및 임베디드 응용 프로그램에 설계되는 방법을 알아봅니다. 스위치의 작동 방식과 선택할 때 고려해야 할 주요 기능 및 인터페이스 옵션을 살펴보겠습니다.

MCC와 스테이트 머신을 사용하여 PIC16F1xxx 시작하기

이 수업을 완료하면 State Machine, MPLAB® X 및 MPLAB Code Configurator(MCC)를 사용하여 PIC16F1xxx 애플리케이션을 처음부터 만들 수 있습니다. MCC를 사용하여 GPIO, Timer, USART 및 ADC를 구성할 수 있습니다.

使用MCC 的16-位元Bootloader : 裝置端

本課程會針對如何使用 MPLAB® X IDE 與 MPLAB程式碼配置器(MCC) 對 PIC24/dsPIC33微控制器產生16-位元 Bootloader 做介紹。

密碼學入門

本課程的參與者將學習密碼學的基礎知識

探索低功耗藍牙®（BLE）的簡單應用

從第一步到最終應用探索低功耗藍牙®（BLE)

전자기적 적합성 2부 - 전원 전압 디커플링

이 과정은 공진 회로의 기본, 디커플링 소자의 사용법, 직렬 및 병렬 공진 회로, 그리고 직류 디커플링을 위한 인덕터 및 페라이트 비드 사용법을 다룹니다.

探索Bluetooth®低功耗的简单应用

探索蓝牙BLE，从第一步直到最终应用

电池充电基础

电池化学特性、术语、实际产品的充电波形以及拓扑

ISA/IEC 62443 표준 소개

이 온라인 강좌는 산업 영역에서의 사이버보안 문제의 특이성을 강조하며 구성 요소 수준에서 중점을 두는 가장 유명한 산업용 사이버보안 표준인 IEC 62443 및 관련 인증에 대한 통찰력을 제공합니다.

Microchip의 32비트 Cortex M0+/M23 ARM® 마이크로 컨트롤러를 사용한 저전력 시스템 설계

SAML10-Xplained Pro 데모 보드 및 Data Visualizer를 사용한 전력 측정 시연과 함께 32비트 ATSAML10 MCU의 저전력 기본 개발 사항 강의

저전력 애플리케이션에서 마이크로칩 폴라파이어 FPGA 사용

마이크로칩 폴라파이어 FPGA는 업계 최저 전력 FPGA 패브릭 제공

TN_Programmable Logic

고집적 UHF 트랜시버를 이용한 무선 통신

이 수업에서는 시스템 내부와 성능을 포함하여 Microchip의 고집적 UHF 제품의 기본 작동 원리를 알아보겠습니다.

배터리 충전 어플리케이션: 배터리 팩 설계 소개

다양한 배열의 여러 셀로 만든 충전식 배터리 팩을 정의하고 설계하는 방법을 배웁니다.

소프트웨어 정의 산업용 게이트웨이에 대한 소개

마이크로칩의 네트워크 프로세서, 턴키 소프트웨어, 통신 및 산업용 화이트박스 애플리케이션을 이용하는 방법에 대해 강의합니다.

저전력 블루투스(BLE) 입문

이 수업에서는, BLE를 지원하는 디바이스를 설계하기위해 필요한 기본 개념을 설명하고, 연결과정과 데이터 송수신에 대한 내용을 다룹니다.

이더넷 기초

이번 수업을 통해 이더넷에 대한 사전 지식이 없는 엔지니어도 이더넷 PHY, 컨트롤러 및 스위치를 이용하여 성공적인 이더넷 설계를 할 수 있도록 도움을 드립니다.

디지털 전력 공급 장치의 설계

이 강의는 디지털 전력 공급 장치의 전체 설계 과정을 설명합니다.

리눅스 개발 시스템 빌드

마이크로칩 MPU용 리눅스 솔루션을 빌드할 수 있는 개발 시스템 구축 방법

C 프로그래밍: 링크드 리스트 데이터 구조

이 강의에서는 데이터를 쉽고 유연하게 제어할 수 있는 링크드 리스트 데이터 구조의 사용법을 설명합니다.

코어 독립형 하이브리드 파워 PWM 제어기와 MPLAB® X SMPS 디자인 툴

이 강의에서는 Microchip 코어 독립형 하이브리드 파워 디바이스의 아키텍처 및 개발환경에 대해 알아보고, 데모보드를 활용하여 3가지 SMPS 솔루션을 보여 드립니다.

TN_Embedded Software

큐리오시티 나노 플랫폼으로 시작하기

이 강의는 큐리오시티 나노 플랫폼을 활용하는 데 도움이 될 것입니다.

아마존 알렉사를 활용하여 임베디드 장치 제어하기

본 수업을 통해 Amazon Voice Assistant 를 활용하여 Embedded Device 를 제어하고 Monitoring 하는 방법에 대해 배울 수 있습니다.

저전력 블루투스를 활용한 간단한 어플리케이션 만들기

저전력 블루투스(BLE)의 기초부터 어플리케이션까지 살펴보기

무선 주파수 애플리케이션 시작하기

이 수업은 UHF 기반 시스템에 대해 배우고자 하는 엔지니어를 위한 것입니다. 다루는 개념에는 일반적인 애플리케이션과 관련된 RF 작동 원리, 동기화 및 데이터 통신이 포함됩니다.

MCC를 이용한 16비트 마이크로컨트롤러 부트로더 구현

이 강의에서는 MPLAB® X IDE 와 MPLAB Code Configurator (MCC)를 사용하여, PIC24/dsPIC33 마이크로컨트롤러의 부트로더를 어떻게 생성하고, 응용프로그램에 적용하는지를 설명합니다

8 비트 컨트롤러 : PIC16 아키텍처

이 강의에서는 PIC16F1x 디바이스 제품군의 기본 아키텍처, 메모리 맵, 명령어 집합, 인터럽트 구조 및 특수 기능을 다룹니다.

MPLAB® X IDE 팁 앤 트릭

이 강의에서는 프로젝트 개발 기간과 노력을 단축할 수 있는 MPLAB® X IDE의 유용한 팁들을 소개합니다.

TN_Embedded Software

고급 임베디드 C 팁, 요령 및 주의 사항

이 수업은 헤더 파일 인클루드, 함수 포인터 및 구조체에 대한 typedef의 사용, 하드웨어 부동 소수점 유닛 또는 펌웨어 라이브러리 없이 부동 소수점 연산, 구조체 및 공용체의 초기화 및 지우기와 같은 개념을 통해 C 프로그래밍 기술을 한 단계 더 발전시키는 데 도움이 됩니다.

다중 위치 원격 온도 감지

이 수업에서는 여러 원격 위치의 온도를 경제적이고 정확하게 온도를 측정하는 방법을 배웁니다.

Ultra-Wideband (UWB) 무선 장치를 이용한 거리 측정 방법

이 강의에서는 UWB 기술의 작동 방식과 거리 측정과 같은 비통신 응용 분야에 UWB 기술이 어떻게 적용될 수 있는지 설명합니다.

신호 컨디셔닝 II - 아날로그 영역

정밀한 아날로그 신호 컨디셔닝 : 아날로그 영역에 초점을 맞춘 실용적인 설계 연구입니다. (Nov 2021)

배터리 충전 기초

실제 제품에 대한 배터리 화학적 구조, 용어, 프로파일 및 충전 토폴로지

Sensors I: 첫번째 인덕티브 위치 센서 설계

이 수업은 테스트를 완료한 설계 규칙을 사용하여 선형 인덕티브 위치 센서를 구축하는 데 필요한 설계 및 구현 단계를 안내합니다.

TN_Sensor Systems

마이크로칩 FPGA 시작하기

마이크로칩 FPGA 제품군과 개발환경에 대한 설명

TN_Programmable Logic

10BASE-T1S 싱글 페어 이더넷 시스템

이 강좌에서는 IEEE802.3cg단거리 10 Mbps 이더넷 물리 계층 표준과 효율적인 멀티드롭 네트워크 구현을 가능하게 하는 PLCA 충돌 관리 프로토콜을 소개합니다.

AVR 주변장치 심화

이 강의는 가장 일반적인 AVR 주변 장치의 아키텍처, 설정, 데모 및 설정시 주의사항에 대한 심화 정보를 제공합니다. 더 많은 자료가 추후에 추가됩니다.

편리한 모터 제어 시제품 개발

상용 및 오픈 소스 툴을 사용한 모델 기반의 모터 제어기 개발(16/32비트 MCU)

마이크로칩 코드 컨피규레이터(MCC) 컨텐츠 매니저 개요

이 과정은 MCC 컨텐츠 매니저를 사용하여 새로운 프로젝트를 생성하고 기본 정보를 탐색하는 방법을 제공합니다.

아날로그 팁 앤 트릭

아날로그 전문가의 회로 분석을 위한 팁 앤 트릭

솔리드 스테이트 조명 소개

이 강의는 조명 용어와 함께 솔리드 스테이트 조명 드라이버 소개 및 제어 기술을 다룹니다.

듀얼 코어 dsPIC33CH 프로그래밍과 디버깅

높은 응답 속도가 필요한 제어 애플리케이션 개발을 위해, 다양한 주변 장치가 상호 연결된 듀얼 코어 dsPIC® 제품의 활용 방법을 배웁니다.

C 언어의 신택스와 구조

C 프로그래밍 언어의 기본

dsPIC33CH 듀얼 코어 제품 아키텍처

이 강의에서는 16비트 듀얼 코어 dsPIC33CH 제품군에 대해 설명합니다.

첫 번째 IoT 프로젝트 디자인을 위한 고려 사항

이 강좌에서는 IoT 컨텍스트 내에서 연결된 장치의 필수 사항을 알아보며, 또한 WiFi, 이더넷, TCP/IP 네트워킹 및 분석, 메시징, 프로비저닝, 클라우드 모델 및 IoT 보안의 기본 사항을 살펴봅니다.

Azure RTOS로 IoT 설계 간소화

이 수업에서는 Microchip SAM E54 MCU에서 동작하고 Azure IoT Hub에 연결할 수 있는 Azure RTOS를 사용하여 디바이스부터 클라우드까지의 여정을 자세히 살펴보겠습니다.

2021 TN_Embedded Software

dsPIC® 듀얼 코어 디지털 시그널 컨트롤러(DSC)를 기반한 모터 제어 기본 교육

이 교육은 3상 BLDCM 및 PMSM의 기본적인 제어 방법에 대한 이해를 목표로 합니다.

CEC1712 및 Soteria G2 Firmware 를 이용한 보안 부팅

이 강의에서는 플랫폼 신뢰 기반 보안 제품의 장점을 살펴보고 Microchip의 CEC1712 마이크로컨트롤러 및 Soteria-G2 펌웨어를 이용하여 안전한 보안 기능을 지원하는 방법을 설명합니다.

CIP(코어 독립형 주변장치)를 활용한 다양한 디지털 및 아날로그 기능 구현

이 강의에서는 마이크로컨트롤러에 내장된 여러가지 CIP(코어 독립형 주변장치)를 이용하여 FSK 디모듈레이터, 고정밀 PWM, WS2812B RGB LED드라이버 구동을 위한 프로토콜, 초음파 센서 구동, 메탈 감지, AC 전원 다이렉트 구동 LED 드라이버, SMPS 구현 방법에 대해 다룹니다.

이더캣, 이더캣 P 및 마이크로칩LAN925x 슬레이브 컨트롤러 패밀리 소개

이 수업에서는 이더캣이 고속, 실시간, 시간에 민감한 네트워크 통신 및 제어를 필요로 하는 모든 저비용의 분산 임베디드 시스템에 어떻게 사용될 수 있는지 설명합니다.

AVR MCU에 대한 MCC Melody API레퍼런스

MCC Melody 구성 요소는 제공된 라이브러리, 드라이버, 주변 장치 라이브러리(PLIB) 및 하드웨어 초기화 장치(HWI)의 총칭입니다. 일부 구성 요소의 경우 현재 MCC Melody API 레퍼런스에 일련의 사용 사례인 "... 사용 방법" 섹션이 포함됩니다.

TN_Microcontroller System

MCP6V51 제로 드리프트 증폭기를 이용한 하이사이드 전류 측정

최대 45볼트의 시스템 전압에서 하이 사이드 전류 측정을 보여줍니다.

암호학 입문

이 강의는 암호학을 처음 접하시는 분들을 위한 입문 강의로서 암호학의 기초를 다룹니다.

MPLAB® Harmony v3基礎

MPLAB® Harmony v3基礎

TN_Embedded Software

串列通訊(I2C/SPI/UART) 的除錯技巧

我們將探索各種除錯技巧，了解在不同的情況下, 哪種工具最適合，以及如何處理一個新的和從未見過的錯誤。

傳感器 I: 設計您的第一個感應式位置傳感器

本課程將指導您使用經過時間測試設計規格來建立線性感應式位置傳感器的所需要的設計和實作步驟

Quartz Oscillators in Space

This course covers the effects of radiation on both quartz and quartz oscillator circuitry as well as the advantages and disadvantages of operating in a vacuum for various quartz oscillator types. (Aug 2023)

TN_Clock and Timing

비휘발성 메모리 안정화 사용을 위한 전략

이 수업에서는 EEPROM 및 NOR 플래시 메모리가 작동, 마모 및 실패하는 방법과 응용 프로그램에서 메모리 장치의 성능과 안정성을 최대화하기 위한 몇 가지 전략을 다룹니다.

信号调节II - 模拟域

精密模拟信号调节—专注于模拟域的实用设计研究。

构建Linux® 开发系统

如何创建一个基于Microchip MPU的Linux开发系统

TN_Embedded Software

Introduction to Solid-State Lighting

This class covers terminology for lighting as well as an introduction to lighting drivers and control techniques for solid state lighting applications. (Oct 2021)

2021 LV_1 EM_Smart Lighting

Introduction to Functional Safety

This class covers the fundamentals of Functional Safety including terminology, standards, FMEDA, requirements and tools offered by Microchip. (June 2022)

TN_Functional Safety 2022 LV_1

Practical I2C: Introduction, Implementation and Troubleshooting

This class covers how to implement the I2C protocol on 8-bit PIC Microcontrollers using the MPLAB X® Code Configurator (MCC). (July 2021)

Exploring Linux Build Systems: Creating your first Embedded Linux System with Buildroot

Creating your first Embedded Linux System with Buildroot. (Dec 2020)

TN_Embedded Software 2020 LV_3

使用 Curiosity Nano 平台進行快速產品原型製作

本課程將幫助您充分利用 Curiosity Nano 開發平台。

25047 CLK1: Clock Generation and Performance Analysis (August 2025)

This class is an overview of various clock generation technologies, including quartz, MEMS, and atomic clocks as well as a look at applications for the various types of clocks.

auto-registration 2025

Exploring Bluetooth® Low Energy (BLE) From First Steps To Final Application

This class is for engineers who want to learn BLE with little to no previous experience. (Dec 2020)

USB 3 の基礎

このコースは、USB 3ハードウェアインターフェイスを現在または新しい製品設計に追加するのに役立ちます。

TN_WN Wired Networking TN_WN USB

MicrochipイーサネットPHY設計のためのシリアライザ/デシリアライザ（SerDes）基礎

このコースでは、なぜSerDes（シリアライザ/デシリアライザ）がイーサネットアプリケーションにとって非常に魅力的なのか、そしてその技術がどのように機能するのかを説明します。

PoEとIEEE802.3bt規格のご紹介

このコースでは、PoE（Power over Ethernet）、PSE（Power Source Equipment）技術、IEEE802.3bt規格を紹介します。 (Dec 2021)

I2C 통신 소개, 기능 구현 및 문제 해결

이 강의는 MPLAB X 코드 컨피규레이터(MCC)를 사용하여, 8비트 PIC 마이크로컨트롤러로 I2C 통신 구현 방법을 소개합니다

Telemetry Data Acquisition & Controls

このビデオは、LX 7730チップの機能とその宇宙での応用についての詳細な説明を提供します。 (Jan 2025)

アナログ回路シミュレータ(Mindi™)のヒントとコツ

アナログエキスパートからの役立つヒントとコツ

モーター制御の開発やデバッグ作業を簡略化するソフトウェアツール

X2CScopeは、モーター制御開発やデバッグ作業を大幅に簡略化することのできるソフトウェアツールです。

不揮発性メモリの信頼性確保に向けた戦略

このクラスでは、EEPROMとNORフラッシュメモリの動作、消耗、故障のメカニズム、およびアプリケーションにおけるメモリデバイスの性能と信頼性を最大化するためのいくつかの戦略について説明します。

トラストプラットフォームデザインスイート v2 の概要

Trust Platform Design Suite v2(TPDSv2)が、組込み設計におけるハードウェアセキュリティの実装を加速し、Microchip SecureプロビジョニングサービスをPoC（概念実証）から量産まで有効にする方法をご覧ください。

Linux 開発システムの構築

Microchip MPU製品向けにLinuxソリューションをビルドするための開発環境の構築方法

TN_Embedded Software

AVR® MCU用MCC Melody APIリファレンス

MCC Melodyコンポーネントとは、提供されるライブラリ、ドライバ、ペリフェラルライブラリ（PLIB）、およびハードウェアイニシャライザ（HWI）の総称です。一部のコンポーネントについては、MCC Melody APIリファレンスに、一連の使用例である「...の使用方法」セクションが追加されました。 (Jan 2023)

TN_Microcontroller System

Microchip コードコンフィギュレータ (MCC) コンテンツマネージャ (CM) の概要

このコースでは、MCC コンテンツマネージャを使用して新しいプロジェクトをナビゲートおよび作成する方法に関する基本的な情報を提供します。(June 2022)

基本的なネットワーク管理

イーサネットスイッチの基本概念と主な機能について紹介します。（2023年5月）

10BASE-T1Sシングルペアイーサネットシステムの統合

このクラスでは、IEEE 802.3cgショートリーチ 10Mbps イーサネット物理層標準と、効率的なマルチドロップ・ネットワークの実装を可能にする PLCAコリジョン管理プロトコルを紹介します。(2022年11月）。

超広帯域（UWB）RFによる距離測定の始め方

UWB技術がどのように機能し、距離測定などの非通信アプリケーションにどのように応用できるかを探ります。

センサ: 初めての誘導型位置センサの設計

このクラスでは、リニア誘導型位置センサを製作する為に必要な設計と実装のステップのガイドを実施します。 (Oct 2021)

8ビットマイコン：PIC16のアーキテクチャ

このクラスは、PIC16F1xファミリの基本的なアーキテクチャ、メモリマップ、命令セット、割り込み構造、および特別な機能について説明します。 (Feb 2022)

dsPIC® デジタルシグナルコントローラ (DSC) デュアルコアデバイスを使用したモーター制御ワークショップ

このワークショップクラスは、3相ブラシレス永久磁石モーターとその基本的な制御について理解したいと考えている方を対象としています。 (May 2022)

デジタル電源セミナー

電源における、デジタル制御の種類・実現方法について解説します。電源における、デジタル制御の種類・実現方法について解説します。

シンプルFreeRTOS：FreeRTOSアプリケーションの開発とデバッグのための初心者ガイド

このクラスは、MPLAB® Harmony v3を使用して、Cortex® M4F/M7デバイス上のFreeRTOSアプリケーションを開始するのに役立ちます。基本的なRTOSの概念に加えて、このクラスでは、タスクのグループ化、優先順位付け、タスク間通信方法などの一般的な設計上の考慮事項に重点を置いています。

TN_Embedded Software

PolarFire® FPGA セキュリティの紹介

このクラスでは、セキュリティの基本的な考え方、特にPolarFire® FPGAのデザイン・セキュリティとデータ・セキュリティについて説明します。 (Nov 2022)

TN_Programmable Logic

MPLAB® Data Visualizerによるビジュアルデバッギング

このクラスでは、MPLAB® Data VisualizerをMPLAB X IDEのプラグインとして使用し、Curiosity Nano Platform、およびXplained Proプラットフォームを使用してPIC®、AVR®、SAM MCUからのリアルタイムデータをプロットします。

TN_Embedded Software

NVRAMとEEPROMの選択と設計

このクラスでは、外付け不揮発メモリについて概要を説明します。 (July 2021)

dsPIC33CH デュアルコアデバイスアーキテクチャ

このクラスでは、16ビット・デュアルコアdsPIC®デバイスであるdsPIC33CHファミリについて説明します。

dsPIC33CH デュアルコアプログラミングとデバッグ方法

デュアルコアのdsPIC®デバイスと相互接続されたさまざまなペリフェラルを活用してタイムセンシティブな組み込み制御アプリケーション開発の方法を説明します。

MPLAB®X IDEの紹介

このクラスでは、MPLAB XIDEの基本について説明します。

TN_Embedded Software

EtherCAT®、EtherCAT P、Microchip社製スレーブコントローラLAN925xファミリ

このクラスでは、高速、リアルタイム、タイムセンシティブなネットワーク通信と制御を必要とするあらゆる低コスト分散組込みシステムにEtherCAT®を使用する方法を説明します。

バッテリー充電の基礎

実在する製品における、バッテリーの化学物質、専門用語、プロファイル、充電器の構成

dsPIC33C ペリフェラルの詳細（PWM）

このクラスでは、最も一般的な dsPIC33C ペリフェラルのアーキテクチャ、セットアップ、デモに関する詳細な情報を紹介します。 (2023年1月)

마이크로칩 열전대 온도 센싱 솔루션

이 강좌에서는 마이크로칩의 열전대 센싱 솔루션인 MCP9600/9601을 소개하고, 열 관리 소프트웨어 유틸리티와 MCP9600 평가 보드를 사용하는 데모를 보여줌으로서, 열전대 측정을 구현하는 방법을 보여줍니다.

dsPIC33CH双核编程与调试

了解如何利用具有各种互连外设的双核dsPIC®器件来加速对实时性要求高的嵌入式应用程序。

MCCを使用した16bitブートローダ：デバイス側

このクラスでは、MPLAB® X IDEと MPLAB Code Configurator（MCC）を使用してPIC24 MCU、dsPIC 33 DSC向け汎用16bitブートローダとATECC608Bの、E C D S A署名機能を使用した16bitセキュアブートローダの作成方法を紹介いたします。

アナログ設計ツールI

MPLAB® Mindi™ Analog Simulatorを使用してアナログ・シミュレーションをマスターする。

Designing with MEMS Oscillators

This class covers selecting a MEMS technology oscillator that can maintain tight frequency stability even under severe environmental conditions. (Feb 2022)

TA_Experts TN_Clock and Timing 2022 LV_1

Getting Started With Microchip's Plug and Play Thermocouple Temperature Sensing Solution

This class demonstrates how to use Microchip's Thermal Management Software Utility and MCP9600 Evaluation board to select, configure and provision a MCP9600 family thermocouple. (June 2022)

2022 TN_Sensor Systems LV_1

Microchip Qi Wireless Power

Vijay Babu gives a presentation about Microchip's leading role in Qi Wireless industries and block diagrams that show a variety of designs (March 2023)

TN_Power Conversion EM_Appliances

Accessory / Disposable Authentication

Nicolas Demoulin talks about mechanical solutions for accessory / disposable authentication and how they operate, while also mentioning provisioning from Microchip (March 2023)

Replacing ASIC Functions with 8-bit PIC® and AVR® MCUs

This class covers an overview of new 8-bit peripherals and then several examples on how to use 8-bit MCUs in creative ways including replacing the functions of an ASIC. (Oct 2022)

TN_Microcontroller System 2022 LV_1

Advanced Embedded C Tips, Tricks, and Cautions

This class will help you take your C programming skills to the next level with concepts like header file inclusion, using typedefs for function pointers and structures, performing floating point math without hardware floating point units or firmware libraries, and initializing and clearing structures and unions. (June 2022)

2022 TT_MU LV_3

8 Bit Microcontrollers: Architecture of the PIC16

This class covers the basic architecture, memory map, instruction set, interrupt structure and special features of the PIC16F1x family of devices. (Feb 2022)

TA_ESE or FAE TN_Microcontroller System 2022 TT_MU LV_1

模拟仿真器使用技巧

在使用模拟仿真器过程中的一些有用的使用技巧

關於類比的技巧和竅門

由我們的類比專家提供的技巧和竅門

在低功耗应用中使用Microchip PolarFire® FPGA

Microchip PolarFire FPGA提供业内功耗最低的FPGA结构

TN_Programmable Logic

dsPIC33CH 雙核燒錄和除錯

了解雙核 dsPIC® 如何利用不同的週邊連，來加速需即時運算的嵌入式控制應用程序

기능안전을 위한 Class B 진단 라이브러리

Learn how to use software diagnostics in safety critical designs with the help of Microchip’s class B diagnostic library for microcontrollers. (July 2022)

MPU系統和PCB設計的障礙陷阱和解決方案

本課程將引導您完成在電子系統中實現高速/高端MPU設備。

TN_PCB Design and Layout TN_Microprocessors

아날로그 파워와 디지털의 만남: Mixed Signal MCU를 사용한 고급 SMPS 토폴로지 및 어플리케이션 구현

Mixed Signal MCU를 사용한 고급 SMPS 토폴로지 및 어플리케이션 구현 방법을 설명합니다.

TN_Microcontroller System

機能安全に関するClass B診断ライブラリ

セーフティクリティカルな設計において、Microchip社のマイクロコントローラ用Class B診断ライブラリを使用しソフトウェア診断を使用する方法についてご紹介しま. (July 2022)

嵌入式Linux介紹

在ATSAMA5D27-SOM1-EK上探索嵌入式Linux

TN_Embedded Software

使用Microchip安全方案连接到云端

使用Microchip安全方案连接到主流物联网云端，实现安全的云连接

使用ATSHA20x进行IP保护

ATSHA20x的功能和如何使用ATSHA20x进行IP保护

Microchip MiWi Mesh无线组网方案介绍

Microchip私有无线通信协议 MiWi Mesh组网方案介绍及其应用

實用的 I2C 介紹、實現和故障排除

本課程介紹如何使用 MPLAB® X 程式碼配置器（MCC）在 8 位元 PIC 微控制器上實現 I2C 協議。

Bluetooth® Low Energy (BLE)を使った簡単なアプリケーションの紹介

Bluetooth® Low Energy (BLE)の最初のステップから最終的なアプリケーションまでの紹介

Microchip FPGA入門

TN_Programmable Logic 2020 LV_1

为您的MCU/MPU或FPGA选择正确的时钟源

本课程将指导你，通过学习一些相关实用的方法。来MCUMPU或FPGA的时钟源。

TN_Microcontroller System TN_Microprocessors TN_Programmable Logic

리눅스 빌드 시스템

이 강의에서는 리눅스 빌드 시스템 중 하나인 Buildroot를 사용하여, 부팅 가능한 임베디드 리눅스 이미지를 만들어 봅니다.

MEMS 오실레이터로 설계

이 클래스에서는 가혹한 환경 조건에서도 엄격한 주파수 안정성을 유지할 수 있는 MEMS 기술 오실레이터를 선택하는 방법을 다룹니다.

在低功耗應用中使用 Microchip PolarFire® FPGA

Microchip PolarFire® FPGA 提供業界功耗最低的 FPGA

TN_Programmable Logic

使用 ATECC608B 安全连接到 AWS IoT Core

本课程演示了与 AWS IoT Core 进行连接和身份验证的基础知识。

CAN 和 CAN FD 協議和物理層基礎知識

本課程將教您 CAN 和 CAN FD 協議和物理層基礎知識。

TN_WN Wired Networking TN_WN CAN

為您的 PCIe 應用選擇時基

本課程將指導您通過相關的實用方法為您的 PCIe 應用選擇最佳時基

TN_WN Wired Networking TN_WN PCIe

你的第一個物聯網項目的設計注意事項

在物聯網上下文中瞭解連接設備的要點。我們探索WiFi、Ethernet、TCP/IP 網路和分析、訊息傳遞、配置、雲端模型和物聯網安全的基本知識。

探索Linux系統的建構

用Buildroot建構你的第一個嵌入式Linux系統

TN_Embedded Software

模拟设计工具 I

使用MPLAB® Mindi™模拟仿真器精通模拟仿真

Microchip电动汽车电源解决方案

本课程的学习者将学习并了解Microchip在电动汽车应用中电源的解决方案。

dsPIC33CH 双核器件架构

本课程将讨论dsPIC33CH系列16位双核dsPIC® 器件。

模拟电源遇见数字化; 用混合信号的微处理器去构建高级开关电源拓扑和应用

用混合信号的微处理器去构建高级开关电源拓扑和应用

密码学入门

本课程的参加者将学习密码学的基础知识。

MPLAB® Analog Designer 简介

介绍如何使用工具MPLAB模拟设计器（MAD）进行在线设计

TN_Analog TN_Embedded Software

介绍PoE和IEEE 802.3bt标准

这门课程提供PoE以太网供电知识，包括PSE供电端技术和IEEE 802.3bt标准。

EtherCAT和Microchip解决方案介绍

本课程将介绍EtherCAT的基本知识。还将介绍如何使用Microchip的MCU以及从站控制器LAN9252来创建一个可以正常工作的EtherCAT从站。

使用MCC的16位Bootloader：设备端

本课程将重点介绍如何使用MPLAB® X IDE和MPLAB代码配置器（MCC）为PIC24/dsPIC33器件生成16位bootloader程序

Microchip SiC产品和驱动解决方案

本课程的学习者将学习并了解Microchip SiC产品和驱动解决方案。

CAN和CAN FD协议，以及物理层基础知识

本课程将教会你CAN和CAN FD，以及他们物理层的基本知识

TN_WN Wired Networking TN_WN CAN

使用CEC1712和Soteria G2进行安全引导

介绍平台信任根的优点，并描述Microchip如何使用CEC1712微控制器和Soteria代码来实现它。

使用 MPLAB® Harmony v3 软件SDK创建32位MCU/MPU高级嵌入式应用程序

本课程展示如何使用MPLAB® Harmony 驱动程序、系统服务和中间件，使您能够快速开发裸机和基于 RTOS的应用程序。

TN_Microcontroller System TN_Microprocessors 2021 TN_Embedded Software

嵌入式Linux® 简介

使用ATSAMA5D27-SOM1-EK评估板来探索嵌入式Linux

TN_Embedded Software

使用MCP6V51零漂移运算放大器进行高边电流检测

展示在高达45伏系统电压下如何实现高边电流检测

如何开发您的第一个IOT物联网项目

在本课中，通过课程内容的深入了解 IoT设备的本质要素。并且，观众将认识到WiFi和以太网对于IoT设备的优缺点，探讨TCP/IP网络模型，了解流量分析、消息传递协议、设备配置、云模型以及物联网安全的基础知识。

V2版可信任平台设计套件简介

学习v2版可信任平台设计套件（TPDSv2）可以帮助我们快速地在嵌入式设计中实现硬件安全，并在概念验证到批量生产过程中使用Microchip安全供应服务

MPLAB Code Configurator : 임베디드 소프트웨어 개발을 위한 MPLAB Code Configurator (MCC)

임베디드 소프트웨어 개발을 위한 MPLAB Code Configurator (MCC) 사용법 소개

TN_Embedded Software

使用 MPLAB® Data Visualizer 進行可視化除錯

在本課程中，我們將使用 MPLAB® Data Visualizer 作為 MPLAB X IDE 的插入器件，並使用 Curiosity Nano 平臺和 Xplained Pro 平臺繪製來自 PIC®、AVR® 和 SAM 微控制器的即時資料。

TN_Embedded Software

類比設計工具Ｉ

使用MPLAB® Mindi™類比模擬器精通類比模擬

MPLAB® Code Configurator 介紹

簡化嵌入式軟體開發的MPLAB® Code Configurator(MCC)

TN_Embedded Software

電池充電基礎

實際產品應用相關的電池化學, 術語, 充電曲線與充電架構。

Linux ビルドシステムについて

Buildrootを用いた、はじめての組込みリナックス生成

TN_Embedded Software

コアから独立した周辺機能(CIP)を内部接続することで、独自のデジタルおよびアナログ機能を実現する

このクラスでは複数のCIPを活用していろいろな回路の設計を簡単にするさまざまなアプリケーションを詳細に説明します。

CIP ハイブリッドパワーPWMコントローラとMPLAB®X SMPSデザインツールの概要

CIP ハイブリッドパワーPWMコントローラとMPLAB®X SMPSデザインツールの概要

TN_Embedded Software

MPLAB® X 提示與技巧

這個課程搜集了非常有用的提示與技巧幫助你充分利用MPLAB® X這個工具｡新增數個新的技巧影片於3/8/2022!

TN_Embedded Software

藉著連接獨立於核心運作的周邊(CIP)建立獨一無二的數位與類比功能

這個課程將詳細介紹許多利用獨立於核心運作的多個周邊（CIP）簡化不同電路設計的應用。

Bluetooth Made Simple - Adding the WBZ451 BLE Module to Your Application

This class will discuss the core features of the WBZ451 BLE module, its standard interfaces, and how to add the module to your hardware design. (April 2023)

2023 TT_MU LV_3

MPLAB® Harmony v3 Peripheral Librariesを使用した簡単なアプリケーション

MPLAB® Harmony v3 Peripheral Librariesを使用した32ビットMCU/MPUによるシンプルな組込みアプリケーションの作成

TN_Embedded Software

Getting Started Developing Bluetooth® Low Energy (BLE) Android Apps using Android Studio

Getting Started Developing Bluetooth® Low Energy (BLE) Android Apps using Android Studio. (Dec 2020)

USB2ハブの基礎知識

アプリケーションにUSB2ハブをデザインインし、デザインの基本的なテストとデバッグを実行する方法

TN_WN Wired Networking TN_WN USB

固态照明简介

这节课程涵盖了照明的术语，以及固态照明应用的驱动和控制技术的介绍

建構你的Linux開發系統

如何創建為Microchip MPU構建Linux解決方案的開發系統

TN_Embedded Software

USB2.0介紹 Part A：基礎概念與工具

TN_WN Wired Networking TN_WN USB 2020 LV_1

NVRAM和 EEPROM的選擇與設計

本課程是關於外掛式非揮發性記憶體的概述。

NVRAM (Non-volatile memories ) 및 EEPROM 선택 및 설계

이 클래스는 외부 비휘발성 메모리에 대한 개요입니다.

Trust Platform Design Suite v2 툴 소개

TPDSv2(Trust Platform Design Suite v2) 툴을 이용하여 임베디드 설계에서 하드웨어 보안 구현을 가속화하고 컨셉 단계에서 부터 생산에 이르기까지 Microchip Secure 프로비저닝 서비스를 지원하는 방법을 배울 수 있습니다.

CIP混合式電源PWM控制器與 MPLAB® X SMPS設計工具入門

CIP混合式電源PWM控制器與 MPLAB® X SMPS設計工具入門

TN_Embedded Software

MIT App Inventorを使用したBluetooth® Low Energy (BLE) Androidアプリの迅速なプロトタイピング

MIT App Inventorを使用したBluetooth® Low Energy (BLE) Androidアプリの迅速なプロトタイピング

CAN FD네트워크 설계 및 동작

예제 어플리케이션을 기반으로 CAN FD 네트워크를 디자인하고 동작을 통해 CAN FD 프로토콜과 물리 계층에 대해 알아봅니다.

TN_WN Wired Networking TN_WN CAN

Android Studio를 사용하여 Bluetooth® Low Energy (BLE) Android 앱 개발 시작하기

Android Studio를 사용하여 Bluetooth® Low Energy (BLE) Android 앱 개발 시작하기

motorBench® - FOC 모터 제어 개발 툴

이 강의에서는 FOC(Field Oriented Control - 벡터 제어) 기반의 모터 제어 구현을 위한 Microchip motorBench® 를 소개합니다.

TN_Motor Control 2020 LV_3

借助Microsoft Azure IoT服务与Microchip SAME54 Xplained Pro 开发工具包来创建并管理一个IoT设备

学习如何借助Microchip 的 SAME54 Xplained Pro 开发工具包与Microsoft Azure IoT服务快速的与云端建立连接

C 語言：鏈結串列 (Linked List) 資料結構

了解如何使用鏈結串列資料結構使您的資料存取更輕鬆與靈活

Android StudioでBluetooth® Low EnergyのAndroidアプリを開発しよう

Android StudioでBluetooth® Low EnergyのAndroidアプリを開発しよう

使用亚马逊Alexa来控制你的嵌入式IoT设备

在本次培训中，我们将学习如何使用亚马逊语音助手来监控和控制一个嵌入式设备。

X2CScope를 활용한 모터 제어 개발과 디버깅

X2CScope는 모터 제어 개발과 디버깅 과정을 매우 편리하게 만들어 주는 소프트웨어 툴입니다.

시리얼 커뮤니케이션(I2C/SPI/UART)을 위한 디버깅 테크닉

다양한 디버깅 기술을 살펴보고, 각 상황에 가장 적합한 툴이 무엇이고, 전에 보지 못한 문제 및 버그에 접근하는 방법에 대해 알아보겠습니다.

非揮發性記憶體可靠性策略

本課程涵蓋 EEPROM 和 NOR快閃記憶體如何損耗和操作、失效，以及在應用中最大化儲存設備的性能和可靠性的幾種策略。

信任平台設計套件 v2 介紹

了解 Trust Platform Design Suite v2 (TPDSv2) 如何幫助您在嵌入式設計中加快硬體安全性的實現, 並實現從概念驗證到生產的 Microchip 金鑰與安全性功能配置服務 (Secure Provisioning Services).

通过互连独立于内核的外设，创建独特的数字和模拟功能

本课程将详细介绍在多种应用中利用多个独立于内核的外设(CIP)简化电路设计。

Multi-Location Remote Thermal Sensing

In this class you will learn how to economically and accurately measure temperature at multiple, remote locations. (Dec 2021)

2021 TN_Sensor Systems LV_1

探索Linux® 编译系统

使用Buildroot 创建你的第一个嵌入式Linux系统

TN_Embedded Software

以太網路的基礎

本課程將幫助沒有以太網知識經驗的工程師能夠成功地設計以太網 PHY、控制器和交換機

軟體定義工業網路閘道器介紹

如何在電信和工業應用中使用 Microchip 網路處理器 (NPU)、完整軟體方案和白盒(White Box)

E-Scooter Reference Design

Christoph Baumgartner dives into various references designs for E-Scooters and what advantages they bring to customers (March 2023)

TT_Distribution Training EM_E-Mobility

Gate Drivers for Brushless DC (BLCD) Motor in Ceiling Fan Application

This slide deck is a short introduction of our Gate Drivers for Brushless DC (BLCD) Motor in Ceiling Fan Application Demo (May 2023)

TN_Motor Control TT_Distribution Training

使用 Azure 裝置預先配置的服務去大規模配置從原型到生產的 IoT 裝置

瞭解如何執行零接觸的預先配置，以使用 Azure 裝置預先配置的服務，使用 Microchip MCU 和 Azure IoT 對 IoT 裝置進行大規模註冊、配置及連接到雲端。

進階 C 語言程式設計

本課程涵蓋了嵌入式應用C語言程式設計的許多進階應用概念。

乙太網供電 (PoE)、受電設備 (PD) 和 DC-DC 設計注意事項

本課程將介紹 PoE（乙太網供電）-PD（受電設備）技術

dsPIC33CH 雙核架構

本課程將討論16位元 dsPIC33CH雙核系列

This slide deck is a short introduction of our Wireless Power Solutions (May 2023)

TN_Power Conversion 2023 EM_Appliances

CAN 및 CAN-FD 프로토콜과 물리 계층

이 강의에서는 CAN 및 CAN-FD 프로토콜과 물리 계층을 설명합니다.

TN_WN Wired Networking TN_WN CAN

25084 MTR3: No-Code Motor Control Solutions (August 2025)

In this class you will learn advanced motor control system techniques using Microchip’s MotorBench, QSpin, and X2Cscope tools, including when and how to use each tool for motor control, as well as tuning, debugging, and rapid prototyping to efficiently deploy motor control applications.

auto-registration 2025

25051 ETH3: Securing Ethernet with MACsec and MKA (MACsec Key Agreement) (August 2025)

In this class you will learn about the IEEE MACsec and IEEE MKA specifications, including how MACsec provides encryption, decryption, and authentication for Ethernet networks, how the MACsec Key Agreement (MKA) protocol manages key exchange and handshaking, and how these security features are applied and demonstrated in a 10BASE-T1S multi-drop network setup.

auto-registration 2025

dsPIC33C 제품군의 주변장치 심층 분석

이 강의는 가장 일반적인 dsPIC33C 제품군 주변장치의 아키텍처, 설정, 시연 및 놓칠 수 있는 유의사항에 대한 심층 정보를 제공합니다.

기능안전 소개

이 수업에서는 Microchip이 제공하는 용어, 표준, FMEDA, 요구 사항 및 도구를 포함하여 기능 안전의 기본 사항을 다룹니다. (June 2022)

MCP1911x 을 이용한 Hybrid Power Control 개요

이 수업은 마이크로칩의 Hybrid Power Control solution 을 소개하고, DEPA (digitally enhanced Power Analog) 제품인 MCP1911x 의 구조 및 어플리케이션을 소개합니다.

태양광 배터리 충전

이 수업에서는 태양 전지의 동적 임피던스를 처리하는 방법, 파워 포인트 추적 알고리즘을 적용하는 방법, 배터리 및 태양 전지판의 크기를 조정하는 방법, 추적 효율성과 배터리 종류에 따라 필요한 충전 파형 간의 적용 방법을 이해하는 데 도움이 됩니다.

開始使用 Azure RTOS 簡化 IoT 設計

在本課程中，我們將深入探討 Azure RTOS 在 Microchip SAM E54 MCU 上運行並連接到 Azure IoT Hub 的設備到雲之旅

2021 TN_Embedded Software

使用 MPLAB® Harmony v3 軟體框架開發 32 位元微控制器及微處理器的高階嵌入式應用程式

使用 MPLAB® Harmony v3 軟體框架開發 32 位元微控制器及微處理器的高階嵌入式應用程式簡介本課程展示如何使用 MPLAB® Harmony Driver, 系統服務和 Middleware 使你能夠快速開發 Bare-metal和 RTOS 應用程式

2021 TN_Embedded Software

Amazon Alexaで組込みIoTデバイスを制御する

このトレーニングでは、Amazon音声アシスタントを使用してEmbeddedデバイスを監視および制御する方法を学習します。

USB Type-C 인터페이스 개요 및 전력 공급 (Power Delivery)

USB Type-C 인터페이스의 기본 개념과 USB 전력 공급(PD)에 대한 입문 지식을 제공합니다.

以太网基础

本课程可以使一名没有太多以太网知识的工程师成功完成以太网PHY、控制器或交换机的电路设计。

Azure 디바이스 프로비저닝 서비스를 사용하여 시제품에서 양산제품까지 IoT 디바이스들을 프로비저닝

Microchip MCU와 Microsoft Azure IoT를 사용하여, IoT 디바이스들의 등록과 설정 및 연결을 위한 프로비저닝 구현 방법을 알아봅니다

SAMおよびPIC32周辺機能の深い理解

このクラスでは、SAMおよびPIC32周辺機能のアーキテクチャと設定に関する詳細な内容をご説明します.

WFI32/PIC32MZW1を使ったクラウドベースのアプリケーションの簡単な開発

Microchip社のWi-Fi System on a ChipおよびモジュールファミリでIoT開発を効率化できます（2022年7月）。

25043 PCB3: What really is EMI and How do I Tackle it? Part 1 (August 2025)

This class will introduce you to the fundamental principles of EMI/EMC and their impact on your final design.

auto-registration 2025

30 kW SiC Vienna 3-Phase PFC Reference Design

This slide deck shares information's about the 30 kW SiC Vienna 3-Phase PFC Reference Design (May 2023)

TA_ESE or FAE TT_MU TN_SiC

30 kW Phase-Shifted Full Bridge (PSFB) DC-DC Converter Technology Demonstrator

This slide deck shares the material for the 30 kW Phase-Shifted Full Bridge (PSFB) DC-DC Converter Technology Demonstrator (May 2023)

TA_ESE or FAE TT_MU

MPLAB® X IDE介紹

這個課程涵蓋了MPLAB® X IDE的基礎

TN_Embedded Software

Curiosity Nanoプラットフォームを使ったラピッドプロトタイピング

このコースは、Curiosity Nano開発プラットフォームを最大限に活用するための手法をご紹介することを目的としています。

使用Amazon Alexa控制嵌入式 IoT設備

在本次課程中，我們將學習如何使用 Amazon 語音助理監控和控制嵌入式設備。

Trust Platform Design Suite v2 Introduction

Learn how the Trust Platform Design Suite v2 (TPDSv2) can help accelerate the implementation of hardware security in your embedded design and enable Microchip Secure provisioning services from proof of concept to production. (Oct 2021)

Microsoft Azure IoTサービスとMicrochip SAME54 Xplained Pro評価キットを活用したマネージドIoTデバイスを作成する

Microchip社のSAME54 Xplained Pro評価キットとMicrosoft Azure IoTを使用して、クラウドにすばやく接続する方法を学びます。

motorBench® (馬達)

motorBench® Development Suite 是用於磁場導向馬達控制(FOC)的綜合軟件開發工具

TN_Motor Control 2020 LV_3

MIT App Inventor를 사용한 Bluetooth® Low Energy (BLE) 안드로이드 앱 개발

이 강의에서는 MIT App Inventor를 사용하여 안드로이드 앱을 개발하는 실습을 제공합니다.

MPLAB® Harmony v3 基础

MPLAB® Harmony v3 基础

TN_Embedded Software

MPLAB® X技巧

这是一系列非常有用的技巧，可帮助您充分运用 MPLAB® X

TN_Embedded Software

25041 PCB1: Optimizing PCB Layout for Noise Reduction (August 2025)

In this class you will learn how to apply best practices in designing a PCB, including hardware and software techniques which can be used to help avoid and/or resolve real world EMC problems.

auto-registration 2025

25022 FRM3: Build Better Prototypes in Less Time with MCC Melody (August 2025)

This class will teach you how to quickly build application functionality using MPLAB® Code Configurator (MCC) Melody Example Components.

auto-registration 2025

Leveraging MACsec to Secure Automotive Ethernet 10BASE-T1S Communications

Key concepts of MACsec and MKA specifications for use in automotive applications. (Sept 2025)

EM_Automotive LV_3 TN_WN Ethernet 2025 New Courses

Basic Network Management

We will introduce the basic concept of an ethernet Switch and highlight the key features. (May 2023)

2023 TT_MU LV_1

dsPIC33CH Dual Core Programming and Debugging

Learn how a dual-core dsPIC® device with various interconnected peripherals can be leveraged to accelerate time-sensitive embedded control applications. (May 2021)

TN_Microcontroller System 2021 TN_Embedded Software LV_5

Configuration of INICnet™ Technology using MPLAB® Network Creator

This class will teach you an overview on INICnet™ Technology, a synchronous network used for audio and video systems which also supports Ethernet traffic in automotive and industrial environments. (March 2022)

2022 TT_MU TN_Embedded Software LV_3 TT_Tools

Getting Started With Radio Frequency Applications

This class is for engineers who want to learn about UHF based systems. Concepts covered include RF working principle, synchronization and data communication as relates to typical applications. (Dec 2022)

dsPIC33C Peripheral Deep Dive

This class presents deep-dive information on the architecture, setup, demonstration and pitfalls of the most common dsPIC33C peripherals. (Updated August 2024)

TN_Microcontroller System 2023 LV_3

Battery Charging Applications: Introduction to Battery Pack Design

Learn how to specify and design a rechargeable battery pack made from multiple cells in various arrangements. (June 2021)

2021 TT_MU LV_1

Designing Your First Inductive Position Sensor

This class will guide you through the design and implementation steps necessary to build your own linear inductive position sensor using time tested design rules. (Oct 2021)

2021 TN_Sensor Systems LV_3

Ethernet Fundamentals

This class will enable an engineer with no prior Ethernet knowledge to successfully design with Ethernet PHYs, controllers, and switches. (Nov 2021)

TN_WN Wired Networking 2021 LV_1 TN_WN Ethernet

Charging Batteries from Solar

This class will help you understand how to deal with the dynamic impedance of solar cells, apply power-point tracking algorithms, sizing your battery and solar array, and negotiating between tracking efficiency vs. the charge waveform required by your battery chemistry. (Jan 2022)

2022 TT_MU EM_Sustainability

Low Power Programming 101 – Microchip Try

Learn how to design energy efficient systems by exploring different operating modes, design approaches, CIPs, and clock selection. By using the Microchip Try platform, you can upload your code to a remote microcontroller and test your code through the control panel and livestream. Therefore, this course does not require any purchases of additional hardware. (March 2025)

TA_ESE or FAE TN_Microcontroller System TT_MU LV_1 2025 New Courses

Low-Power System Design with Microchip's 32-bit Cortex M0+/M23 ARM® Microcontrollers

Low power development fundamentals for the 32-bit ATSAML10 MCU with power measurement demonstrations using the SAML10-Xplained Pro Demo Board and Data Visualizer. (Sept 2021)

TN_Microcontroller System 2021 LV_3

AVR Peripheral Deep Dive

This class presents deep-dive information on the architecture, setup, demonstration and pitfalls of the most common AVR peripherals. More chapters will be added as they become available. (Updated June 2023)

2022 2023 TT_MU LV_3

dsPIC33 Totem Pole PFC design

This slide deck is a short introduction of our dsPIC33 Totem Pole PFC design (May 2023)

TN_Power Conversion 2023

Picking the Right Timing Sources for your MCU/MPU or FPGA

This class guides you through relevant, practical approaches to deciding on the timing sources for your MCU/MPU or FPGA. (June 2021)

TN_Clock and Timing TN_Microcontroller System TN_Microprocessors TN_Programmable Logic 2021 LV_3

Getting Started with PIC16F1xxx MCUs using MCC and State Machines

When you complete this class you will be able to create a PIC16F1xxx application from scratch using State Machines, MPLAB® X and MPLAB Code Configurator (MCC). You will be able to configure GPIO, Timer, USART and ADC using MCC. (Nov 2021)

TN_Microcontroller System 2021 LV_1 TT_Tools

Symmetric Authentication with CryptoAuthentication ICs

This class provides threat models, explanations and comparisons of shared symmetric key authentication and diversified symmetric key on security ICs. (Oct 2024)

TA_ESE or FAE TN_Security LV_3 2024

NVRAM and EEPROM Selection and Design

This class is an overview of external non-volatile memories. (July 2021)

Introduction to Breakpoints with MPLAB® IDE

This class covers hardware and software breakpoints which are the most useful of all tools when debugging your code

TA_ESE or FAE TN_Microcontroller System xMPLAB® X TN_Embedded Software LV_1 2024 TT_Tools

Calibration Techniques for Analog Sensors and Mixed Signal Systems

This in-depth class will teach and illustrate calibration techniques to minimize inherent hardware gain and offset errors in various real-world analog systems. (Dec 2021)

TN_Analog 2021 TT_MU TN_Sensor Systems

25012 FPGA1: Getting Started with Microchip FPGAs (August 2025)

In this class you will get a comprehensive understanding of FPGA architecture, design flow, and development tools. You will be equipped with the knowledge to start incorporating Microchip FPGA designs into you projects.

auto-registration 2025

Easily Develop Cloud-based Applications Using WFI32/PIC32MZW1

Streamline your IoT development with Microchip's family of WiFi System on a Chip and Modules. (July 2022)

Select a Timing Source for your PCIe Application

This class guides you through relevant, practical approaches to selecting the optimal timing source for you PCIe application. (July 2021)

TN_Clock and Timing TN_WN Wired Networking 2021 LV_1 TN_WN PCIe

Rapid Prototyping with the Curiosity Nano Platform

This course will help you to get the most out of the Curiosity Nano development platform. (Nov 2021)

C Programming: Linked List Data Structures

Learn how to use Linked List Data Structures to make your data access easier and more flexible. (June 2021)

2021 TT_MU TN_Embedded Software LV_3

Rapid Prototyping Bluetooth® Low Energy (BLE) Android Apps using MIT App Inventor

Rapid Prototyping Bluetooth® Low Energy (BLE) Android Apps using MIT App Inventor. (Dec 2020)

Designing and Implementing a CAN FD Network

This course will teach you the CAN FD protocol and physical layer by guiding you through a CAN FD network design and implementation based on an example application. (Jan 2022)

TN_WN Wired Networking 2022 TN_WN CAN

Strategies for Nonvolatile Memory Reliability

This class covers how EEPROM and NOR Flash memory operate, wear out, and fail, as well as several strategies for maximizing performance and reliability of memory devices in applications. (Sept 2021)

Automate FW testing with MDBCore scripting - Compile without IDE

In this course you will learn how to manually extract firmware revisions and how to compile code without an Integrated Development Environment (IDE) (December 2023)

TN_Microcontroller System xMPLAB® X TT_MU LV_5 2024

Enabling Wi-Fi and Bluetooth Connectivity in an Embedded Design Using Linux

This class demonstrates enabling Wi-Fi and Bluetooth connectivity into an embedded design. Microchip’s Wireless System-On-Module (WLSOM) is based on MPU integrated with Wi-Fi/BLE combo Link controller, targeted to reduce time to market by simplifying hardware design and software development. (November 2024)

TA_ESE or FAE TN_Wireless Connectivity TN_Security xLinux TN_Embedded Software LV_3 2024

Temperature Controlled Oscillators: OCXO's, EMXO's & MCXO's

This course covers oven-controlled oscillators (OCXOs) and how they achieve such tight frequency control over temperature. (Nov 2022)

TN_Clock and Timing 2022 LV_1

Air Speed Sensing Using Solid-State Thermal Impedance

This course shows you how to measure air speed using solid-state thermal impedance techniques. (May 2023)

2023 TT_MU TN_Sensor Systems LV_3

Electromagnetic Compatibility (EMC) Part 1 - Basics and Definitions

This includes understanding what EMC is, the different modes of EMC coupling and propagation, characterizing binary signals and exploring radiation modes and their interaction with binary signals. (November 2023)

TA_ESE or FAE TN_Analog 2023 TT_MU LV_3

25015 FPGA4: C/C++ to Verilog using FPGA SmartHLS Compiler (August 2025)

In this class, you will gain the skills to verify functionality and analyze the performance of your designs, expedite your design cycle by leveraging the capabilities of the SmartHLS compiler.

auto-registration 2025

Introduction To MPLAB® X IDE

This class covers the basics of the MPLAB X IDE. (Dec 2020) [English and Spanish subtitles available]

TN_Embedded Software 2020 LV_1 TT_Tools

Cryptography Primer

Attendees of this class will learn the fundamentals of cryptography. (Dec 2020)

TN_Security 2020 LV_1

25056 IOT1: Wi-Fi and IoT: A Hands-on Primer (August 2025)

This class shows how to use Microchip's RNWF11 UART to Cloud solution by providing a complete IoT attach device to your existing microcontroller

auto-registration 2025

25010 MCU7: Exploring the Power of Microchip's new 32-bit Digital Signal Controllers: Architecture and Peripheral Overview (August 2025)

This class introduces the architecture, core, peripherals, and features of the dsPIC33A family of microcontrollers

auto-registration 2025

25058 IOT3: Kick-Starting IoT Solutions with MicroPython (August 2025)

In this class you will learn how to use MicroPython on a Microchip Wi-Fi device to interface with peripherals, connect to cloud services, and implement MQTT messaging and control, gaining practical experience in developing IoT solutions.

auto-registration 2025

Getting Started With Ultra-Wideband (UWB) RF For Distance Measurement

This class will take you through how UWB technology works and how it can be applied to non-communication applications such as distance measurement. (March 2023)

dsPIC33CH Dual Core Device Architecture

This class will discuss the dsPIC33CH family of 16-bit dual-core dsPIC® devices. (Jan 2021)

TN_Microcontroller System 2021 LV_3

Implementing a MiWi™ Mesh Network

This course will help you get started with the IEEE® 802.15.4 protocol by building a MiWi™ mesh network. (July 2022)

Basics of Developing Microcontroller Applications - Microchip Try

The Microchip Try platform provides online users the chance to learn the basics of microcontrollers without any hardware. Through a series of interactive applications, you will learn how microcontrollers work and how to create simple applications from start to finish.

TN_Microcontroller System TT_MU LV_1 TT_Quick Tipps and Tricks

Getting Started with a New Harmony Graphics Application

This class shows how to use the The MPLAB® Harmony Graphics Suite (MHGS) to design a simple touch-enabled UI application on any Microchip 32-bit Graphics Development Kit. (June 2023)

TN_Human Interface TN_Embedded Software EM_Appliances TT_Tools

Automate FW testing with MDBCore scripting - MDBCore Interface mdb

In this module we cover the mdb, the simplest and first method to utilize MDBCore. (December 2023)

TN_Microcontroller System xMPLAB® X TT_MU LV_5 2024

Intro to Op-Amps Part 1: The Fundamentals

This text-based training explains the basic operational amplifier (op-amp) concepts and terminology. (Aug 2023)

Plug and Play Cloud Connectivity with RN Wi-Fi Modules

This course outlines the features of our Wi-Fi plug and play modules and how they simplify the task of adding connectivity to their own applications. (February 2024)

TA_Experts TA_ESE or FAE TT_MU 2025

Power over Ethernet (PoE), Power Delivery (PD) and DC-DC Design Considerations

This course will offer an introduction to PoE (Power over Ethernet) -PD ( Power Delivery) technology. (Sept 2021)

TN_Power Conversion TN_WN Wired Networking LV_3 TN_WN Ethernet

Introduction to Embedded Linux

Exploring Embedded Linux on the ATSAMA5D27-SOM1-EK. (Dec 2020)

TN_Embedded Software 2020 LV_1

Getting Started with CIP Hybrid Power PWM Controllers and MPLAB® X SMPS Design Tools

Getting Started with CIP Hybrid Power PWM Controllers and MPLAB® X SMPS Design Tools. (Dec 2020)

TN_Power Conversion TN_Core Independant Periph TN_Embedded Software 2020 LV_5 TT_Tools

MCC Melody API Reference for AVR® MCUs

MCC Melody components are the collective name for the provided libraries, drivers, Peripheral Libraries (PLIBs) and Hardware Initializers (HWIs). For select components, the MCC Melody API references now include a “How to use the …” sections, which are a series of use cases. (Jan 2023)

TN_Microcontroller System 2023 LV_3 TT_Tools

USB Type-C Interface Overview and Power Delivery

This course is intended to provide an overview of the USB interface and a brief introduction to USB power delivery. (October 2023)

TN_Power Conversion TN_WN Wired Networking TN_WN USB 2023 LV_1

Introduction to PoE and the IEEE802.3bt Standard

This course will offer an introduction to PoE (Power over Ethernet) as well as PSE (Power Source Equipment) technology and the IEEE802.3bt standard. (Dec 2021)

2021 LV_1 TN_WN Ethernet

Serializer/Deserializer (SerDes) Basics for Your Next Microchip Ethernet PHY Design

This course will answer why SerDes (Serializer/Deserializer) is so compelling for Ethernet applications, and how the technology works. (Sept 2023)

TA_ESE or FAE TN_WN Wired Networking 2023 TT_MU TN_WN Ethernet

25064 FUSA3: Functional Safety Software Development (August 2025)

In this class you will learn how to develop safety-critical software with a focus on ISO 26262, including software safety requirements, best practices for safety-critical systems, verification and validation techniques, the importance of traceability, and hands-on experience with static code analysis, unit testing, and fault injection testing to ensure reliability and compliance.

auto-registration 2025

Capacitive Touch for UI and Hands-Off Detection

Laurence Barberis talks about Capacitive Touch for UI and Hands-Off Detection (March 2023)

TA_ESE or FAE TN_Human Interface TT_MU

25045 PCB5: Create Your Next proof-of-concept using AI within minutes (August 2025)

This class will enable you to quickly create proof-of-concept projects using commonly available development platforms like Arduino and AI tools.

auto-registration 2025

25077 SENS1: Mastering Inductive Position Sensors (August 2025)

In this class you will get hands-on experience with a linear position sensor, learn to describe its sensing technology, create a calibration curve, implement a custom sensor design, and use the Microchip linear position library to accelerate your linear position measurement projects.

auto-registration 2025

25044 PCB4: What really is EMI and How do I Tackle it? Part 2 (August 2025)

In this second and final part of the series, you will explore filter topologies and learn how to design a filter for conducted EMC

auto-registration 2025

PCB Design for Today's High-Speed Protocols

This presentation is targeted to engineers and layout designers who want to know more about how to deal with the challenges of modern high speed design. (April 2023)

TN_PCB Design and Layout 2023 LV_3

25025 FRM6: Mastering GUI Design with Microchip Graphics Suite (August 2025)

In this course, participants will gain a thorough understanding of the MGS Composer and Simulator, practical experience in GUI design and simulation, and the skills to deploy their designs onto hardware.

auto-registration 2025

25027 LNX1: Custom Linux Hardware Integration (August 2025)

The class will focus on making necessary modifications to bootloaders, the Linux kernel, and the device tree in order to integrate custom hardware design into a Linux image.

auto-registration 2025

25078 SENS2: Electrochemical Gas Sensors: Principles and Applications (August 2025)

In this class you will learn the working principles and key components of electrochemical gas sensors, how to select and design circuits for electrochemical CO2 sensors, understand their advantages and limitations in real-world applications, and gain hands-on experience in interfacing and measuring CO2 with these sensors.

auto-registration 2025

Digital Power Reference Designs

This slide deck is a short introduction of our Digital Power Reference Designs (May 2023)

TN_Power Conversion TN_Motor Control 2023

Getting Started with Highly Integrated UHF Transceivers

In this class, we will uncover the fundamental working principles of Microchip's highly integrated UHF products, including system internals and performance. (March 2023)

Low Dropout Regulator Basics (LDO)

This class is for those with little to no background knowledge about Low Dropout Regulators (LDO). (June 2023)

25083 MTR2: Brushless Motor Control Workshop (August 2025)

In this class you will learn comprehensive BLDC motor control techniques, including block, sine, sensored, and sensorless drives, discover which Microchip tools are best suited for each application, and gain hands-on experience with forced commutation, sensored and sensorless control, and Field Oriented Control (FOC).

auto-registration 2025

25019 DEV1: Getting Started with MPLAB Extensions in VS Code (August 2025)

Introduction to the MPLAB Extensions for VS Code, offering a familiar development environment for existing VS Code users.

This slide deck is a short introduction of our Motor Control Demos (May 2023)

TN_Motor Control 2023

25050 ETH2: Using Microchip Ethernet Switches to Provide Deterministic, Reliable, and Scalable Connectivity (August 2025)

In this class you will learn the fundamentals of Ethernet switches, the advantages of managed switches, and how Time-Sensitive Networking (TSN) standards enhance network reliability and determinism, with hands-on experience configuring TSN switches using Switchdev for VLAN and Precision Time Protocol (PTP), and a live demonstration of iStaX for Time-Aware Shaping and redundancy protocols to improve industrial network performance.

auto-registration 2025

아날로그 센서 및 혼합 신호 시스템을 위한 교정 기술

이 심층적인 수업에서는 다양한 실제 아날로그 시스템에서 고유한 하드웨어 이득 및 오프셋 오류를 최소화하는 교정 기술을 가르치고 설명합니다.

MPLAB® Harmony v3 주변장치 라이브러리를 사용한 간단한 어플리케이션

MPLAB® Harmony v3 주변장치 라이브러리를 사용하여 32비트 MCUs/MPUs로 간단한 임베디드 어플리케이션 생성하기

TN_Embedded Software

motorBench® Development Suiteは、フィールド指向性制御(ベクトル制御)をおこなうための包括的なソフトウェア開発ツールです。

TN_Motor Control 2020 LV_3

아날로그 디자인 툴

MPLAB® Mindi™ 아날로그 시뮬레이터를 이용한 시뮬레이션

MPLAB® X IDE 소개

MPLAB X IDE 통합개발환경에 대한 기초 강좌

TN_Embedded Software

8ビットPIC®およびAVR®MCUsでASIC機能を置き換える

このクラスでは、新しい8ビット周辺機器の概要と、ASICの機能を置き換えるなど、8ビットMCUを創造的な方法で使用するいくつかの例をカバーしています. (Oct 2022)

TN_Microcontroller System

임베디드 리눅스 소개

이 강의에서는 Microchip ATSAMA5D27-SOM1-EK1 툴을 사용하여 임베디드 리눅스를 실습하고 살펴봅니다.

150kVA 3-Phase SiC Power Stack Evaluation Kit

This slide deck covers the Mersen 150kVA 3-Phase SiC Power Stack Evaluation Kit shown at the pcim (May 2023)

10BASE-T1S 싱글 페어 이더넷에 대한 소개(SPE)

10BASE-T1S라고 하는 새로운 이더넷 표준에 대해서 설명하며, 오토모티브와 인더스트리얼에서의 정보 기술(IT), 운영 기술(OT) 사용 예제에 대해서 설명합니다. (Oct 2022)

PolarFire® FPGA 보안 소개

이 강의에서는 보안의 기본 원칙, 특히 PolarFire® FPGA의 설계 보안 및 데이터 보안 기능에 대해 설명합니다.

TN_Programmable Logic

电池充电应用: 电池组设计介绍

学习如何定义和设计一个由多节电池不同排列方式组成的可充电电池

C的語法和結構

組み込みLinuxの紹介

ATSAMA5D27-SOM1-EKを使用した組み込みLinuxの説明

TN_Embedded Software

多点位远程热侦测

这个课程将学习如何经济而有准确地对多个远程点位进行温度测量

使用MPLAB® Data Visualizer进行可视化调试

在这堂课上，我们将使用MPLAB® Data Visualizer作为MPLAB X IDE的一个插件，来绘制实时数据图表，数据来源于PIC®, AVR® 和 SAM 单片机，通过使用Curiosity Nano Platform和Xplained Pro开发板。

TN_Embedded Software

Microcontroller Applications Workshop - A short Introduction

TN_Microcontroller System auto-registration 2025

Linux Yocto ディストリビューション: Toaster の紹介

Toasterインターフェースを使用したYoctoイメージの設定とビルドの自動化 (July 2022)

TN_Embedded Software

ARM® Cortex® M0+ MCU용 부트로더 개발

이 강좌는 펌웨어 부트로더의 기초를 검토하고 MPLAB® X IDE와 MPLAB Harmony 부트로더 라이브러리를 사용하여 SAM D21 MCU에서 부트로더를 지원하는 애플리케이션을 배포하는 방법을 안내합니다.

TN_Microcontroller System

정전용량 터치 디자인: Microchip Code Configurator (MCC) 멜로디를 활용한 정전용량 터치

이 과정에서는 MPLAB® X, MCC Melody, Microchip Touch 라이브러리를 사용하여 버튼과 슬라이더가 있는 정전용량 터치 프로젝트를 생성해 보는 것입니다.

TN_Embedded Software

Microchip Ethernet/Phy Design을 위한 SERDES 기초.

이 과정에서는 Ethernet 애플리케이션에 SerDes(직렬화/역직렬화)가 왜 그렇게 매력적인지, 그리고 이 기술이 어떻게 작동하는지에 대해 설명합니다.

TN_WN Wired Networking TN_WN Ethernet

MPLAB® Harmony v3の基礎

MPLAB® Harmony v3の基礎

TN_Embedded Software

Azure RTOSでIoT設計の簡素化をはじめよう

このクラスでは、Microchip SAM E54 MCU上で動作するAzure RTOSを使用して、Azure IoT Hubに接続し、デバイスからクラウドへの旅を体験していただきます。

2021 TN_Embedded Software

MPLAB® Harmony v3 기초

MPLAB® Harmony v3 기초

TN_Embedded Software

Migrating from MPASM™ to MPLAB® XC8 PIC® Assembler

This course will help you migrating your existing MPASM™ projects to MPLAB® XC8 PIC® Assembler. The lecture will focus only on differences between the two assemblers. (Feb 2023)

2023 TN_Embedded Software LV_1 TT_Tools

C Programming Callbacks

This class covers Callbacks in C which allow you to create more flexible and modular functions and enable you to separate hardware and software operations. (Jan 2023)

TA_Experts 2023 TT_MU TN_Embedded Software LV_3

CIP混合功率PWM控制器和MPLAB® X SMPS设计工具入门

CIP混合功率PWM控制器和MPLAB® X SMPS设计工具入门

TN_Embedded Software

电机控制快速成型设计

使用商业工具和开源工具来建模开发16位及32位单片机

MPLAB® X Tips & Tricks

This is a collection of extremely useful tips and tricks that will help you get the most out of MPLAB® X. (Updated Jan 2021)

TN_Embedded Software 2020 LV_1 TT_Tools

MPLAB® Network Creator를 이용한 INICnet™ 기술 구성

이 수업에서는 오디오 및 비디오 시스템에 사용되는 동기식 네트워크인 INICnet™ Technology에 대한 개요를 설명합니다. 이 네트워크는 자동차 및 산업 환경에서도 이더넷 트래픽을 지원합니다.

TN_Embedded Software

앙상블 그래픽 툴킷(EGT)을 사용하는 Linux 그래픽

이 수업에서는 EGT(Ensemble Graphics Toolkit)의 구조와 이를 사용하여 간단한 그래픽 응용 프로그램을 만드는 방법에 대해 배웁니다.

TN_Embedded Software

Design with Multi-output MEMS Oscillators

Short course designed to help you select the best multi-output MEMS oscillator for your project. (March 2024)

TN_Analog TN_Clock and Timing TN_PCB Design and Layout TN_Sensor Systems LV_3 2024

Microcontroller Applications - Human Interface / Touch

A well-designed and reliable HMI user experience, supported by Microchip's MCUs and software libraries, is crucial for influencing purchasing decisions.

TN_Microcontroller System TN_Human Interface auto-registration 2025

你好FPGA (Hello FPGA)

Microchip FPGA入门

TN_Programmable Logic 2020 LV_1

motorBench® 开发套件是磁场定向电机控制（FOC）的综合软件开发工具

TN_Motor Control 2020 LV_3

MPLAB® Harmony v3 Fundamentals

MPLAB® Harmony v3 Fundamentals (Dec 2020)

TN_Embedded Software 2020 LV_5 TT_Tools

借助Microsoft Azure IoT服務與Microchip SAME54 Xplained Pro 開發套件來建立並管理一個 IoT 設備

學習如何借助Microchip 的 SAME54 Xplained Pro 開發套件與Microsoft Azure IoT服務來建置快速連接雲端

从零开始创建数字电源

本课程涵盖了创建数字电源的整个过程

WFI32/PIC32MZW1를 사용하여 클라우드 기반 애플리케이션을 쉽게 개발할 수 있습니다.

마이크로칩의 와이파이 SoC(System on a Chip) 및 모듈 제품군으로 IoT 개발을 간소화하십시오. . (July 2022).

8비트 PIC MCU 주변장치 소개

이 강좌는 가장 일반적인 PIC16 및 PIC18의 주변 장치의 아키텍처, 설정방법, 데모 영상 및 유의사항들에 대하여 소개합니다. 매월 새로운 강좌가 업데이트 될 예정입니다.

TN_Microcontroller System

고급 C 프로그래밍

이 강의는 임베디드 어플리케이션을 위한 C 프로그래밍 언어의 고급 개념을 다룹니다.

MCU/MPU 또는 FPGA에 적합한 타이밍 소스 선택

이 강의는 MCU/MPU 또는 FPGA의 타이밍 소스를 결정하기 위한, 적절하고 실용적인 접근 방식을 안내합니다.

TN_Microcontroller System TN_Microprocessors TN_Programmable Logic

Don't Reinvent The Wheel.... Just Put It On The Display!

Chad Solomon explains how modern Human-Machine Interface (HMI) can be improved with ease of use, providing customers with convenient and more robust designs (March 2023)

TA_Client Engagement TN_Human Interface

PIC® MCU 用 MCC Melody API リファレンス

MCC Melody コンポーネントは、提供されるライブラリ、ドライバ、ペリフェラルライブラリ (PLIB)、およびハードウェアイニシャライザ (HWI) の総称です。一部のコンポーネントについては、MCC Melody API リファレンスに、一連の使用例である「…の使用方法」セクションが含まれるようになりました。 (Jan 2023)

TN_Microcontroller System

Ensemble Graphics Toolkitを使用したLinuxグラフィックス

説明このクラスでは、Ensemble Graphics Toolkit（EGT）の構造と、それを使用してシンプルなグラフィカルアプリケーションを作成する方法について学びます。 (July 2022)

TN_Human Interface TN_Embedded Software

European MASTERs Conference Guide

An overview of all classes

2024 auto-registration

Automate FW testing with MDBCore scripting - FW test automation with Java

This class focuses on MDBCore scripting in the MPLAB® X ecosystem with Java. (December 2023)

TN_Microcontroller System xMPLAB® X TT_MU LV_5 2024

PIC® および AVR® MCU の内蔵アナログを使用した設計

このトレーニングでは、内蔵されたアナログペリフェラルを備えた PIC® および AVR® マイクロコントローラを使用して、スタンドアロンのアナログおよびディスクリートコンポーネント (オペアンプ、ADC、DAC、電圧リファレンス、およびアナログコンパレータ) を備えたいくつかのアプリケーションを設計および最適化する方法を示します. (Nov 2022)

TN_Microcontroller System

Getting Started with Writing Code for the Microchip ARM® Cortex® Microcontrollers

Learn how to get started writing code and operating peripherals on the Microchip SAM ARM Cortex M0+, M23 and M4 microcontrollers. (Sept 2021)

TN_Microcontroller System 2021 TN_Embedded Software LV_3

微处理器MPU系统的PCB设计常见问题和解决方案

本课程将指导您如何在电子系统中实现高端微处理器设备的高速电路设计。

TN_PCB Design and Layout TN_Microprocessors

ARM® Cortex®-M 아키텍처 개요

이 과정은 Cortex-M 코어의 아키텍처 차이점을 다루며, 사용자 애플리케이션에 가장 적합한 디바이스를 선택하는 데 도움을 줄 것입니다.

Introduction to PolarFire® FPGA Security

This class explains the basic tenets of security, and specifically the design security and data security features of PolarFire® FPGAs. (Nov 2022)

TN_Security TN_Programmable Logic 2022 LV_3

設計和實現 CAN FD 網路

本課程將教您CAN FD 協議和實體層。藉著應用實例導引你完成CAN FD 網路的設計和實現.

TN_WN Wired Networking TN_WN CAN

10BASE-T1S シングルペア・イーサネット入門

10BASE-T1Sと呼ばれる新しいイーサネット規格の簡単な説明と、自動車や産業界、情報技術（IT）や運用技術（OT）における代表的なアプリケーション例を紹介する。(2022年10月）。

PoE（パワー・オーバー・イーサネット）、PD (パワー・デリバリー）、DC-DC設計に関する考察

このコースでは、PoE（パワー・オーバー・イーサネット）- PD（パワー・デリバリー）技術の紹介を行います。 (Sept 2021)

PCIe 애플리케이션의 타이밍 소스 선택

이 클래스에서는 PCIe 애플리케이션에 가장 적합한 타이밍 소스를 선택할 수 있는 적절하고 실용적인 접근 방식들을 안내합니다.

TN_WN Wired Networking TN_WN PCIe

25075 SEC6: Mastering Secure Boot for MPUs (August 2025)

In this class you will learn to secure the boot process on Microchip MPU devices using cryptographic techniques (Hashes, AES, RSA, ECDSA), manage device provisioning and OTP memory, and implement secure boot and authentication for the AT91Bootstrap bootloader.

auto-registration 2025

25006 MCU3: Configurable Logic Block Part 1 - Harnessing the Power of Programmable Logic in PIC Microcontrollers (August 2025)

This class presents the first of two classes that outline the architecture, applications and tools for using the Configurable Logic Block (CLB) on PIC® microcontrollers

auto-registration 2025

25068 HMI4: Implementing Capacitive Touch I2C Host Interface for MTCH2120 (August 2025)

In this class you will learn how to implement the MCC Harmony I2C Host Driver for the MTCH2120 capacitive touch sensing controller, including understanding its architecture, commands, and capabilities, adding the I2C host module to an MCC Harmony project, and modifying the host interface to read and display touch sensor status.

auto-registration 2025

USB 2.0 파트 A: 기본 개념 및 툴 소개

TN_WN Wired Networking TN_WN USB 2020 LV_1

An Introduction To The ISA/IEC 62443 Standard

This online class highlights the peculiarities of the cybersecurity problem in the industrial domain and provides insight on the most prominent industrial cybersecurity standard (IEC 62443) and on the related certifications, focusing at component-level. (April 2022)

FreeRTOS 간소화: FreeRTOS 애플리케이션 개발 및 디버깅을 위한 초보자 가이드

이 수업은 MPLAB® Harmony v3를 사용하여 Cortex® M4F/M7 장치에서 FreeRTOS 애플리케이션을 시작하는 데 도움이 됩니다. 기본 RTOS 개념 외에도 수업은 작업 그룹화, 우선 순위 지정 및 작업 간 통신 방법과 같은 일반적인 설계 고려 사항을 강조합니다.

TN_Embedded Software LV_1

Introduction to 10BASE-T1S Single Pair Ethernet (SPE)

A brief description of the new Ethernet standard called 10BASE-T1S, and some of its typical application examples in the automotive and industrial worlds, as well as in information technology (IT) and operational technology (OT). (Oct 2022)

TN_WN Wired Networking 2022 TN_WN Ethernet

NVRAM 和 EEPROM的选择与设计

本课程主要介绍外部非易失性存储器。

Power over Ethernet (PoE), Power Delivery (PD) and DC-DC 설계에 관한 고려

이번 강의에는 PoE (Power over Ethernet) 와 PD ( Power Delivery) 기술에 관한 기본지식을 설명합니다.

TN_Power Conversion TN_WN Wired Networking 2021 LV_3 TN_WN Ethernet

USB 3 Fundamentals

This course will help you to add a USB 3 hardware interface to your current or new product design. (June 2022)

TN_WN Wired Networking 2022 TN_WN USB LV_1

USB2.0 集线器基础知识

如何将 USB2.0 集线器, 设计到您的应用，以及设计平台的基本测试和调试

TN_WN Wired Networking TN_WN USB 2020 LV_1

Introduction to USB 2.0

Introduction to USB 2.0 Part A: Basic Concepts and Tools (Dec 2020)

TN_WN Wired Networking TN_WN USB 2020 LV_1

USB 2.0入门 - A: 基本概念和工具

TN_WN Wired Networking TN_WN USB 2020 LV_1

TSN Industrial Networking

Ian Saturley presents solutions in automation networks, portfolios, and how they are applied in industrial settings, while Matthias Goeing explains how time sensitive networking works (March 2023)

TN_WN Wired Networking EM_Industrial

使用 X2CScope 簡化電機控制開發和除錯

X2CScope 是一款可以大大簡化電機控制開發和除錯過程的軟體工具。

Debugging Techniques for Serial Communications (I2C/SPI/UART)

We will explore various debugging techniques, learn what tool best applies for each situation and how to approach a new and never-before-seen bug. (Sept 2021)

TN_WN Wired Networking TN_Embedded Software LV_1

USB2 허브 기초

USB2 허브를 애플리케이션에 설계하고 , 기본 테스트 및 디버깅을 수행하는 방법

TN_WN Wired Networking TN_WN USB

USB 2.0 Part A: 基本的な概要とツール

TN_WN Wired Networking TN_WN USB 2020 LV_1

Linux Yocto Distributions: An Introduction to Toaster

Using the Toaster Interface to configure and automate building Yocto Images. (July 2022)

2022 TN_Embedded Software LV_1

初めてのMicrochip FPGA

TN_Programmable Logic 2020 LV_1

Introduction to FlexConnect

This class provides a comprehensive explanation of a proprietary feature of Microchip’s USB smart hub called FlexConnect which offers the option of interchanging the functionalities of host and device ports.

TN_WN Wired Networking LV_1 2024

C 프로그래밍 콜백

이 강의에서는 보다 유연하고 모듈화된 함수를 생성하고 하드웨어와 소프트웨어 작업을 분리할 수 있는 C의 콜백을 다룹니다.

Microsoft Azure IoT 서비스 및 Microchip SAME54 Xplained Pro 평가 키트를 활용한 관리형 IoT 디바이스 만들기

이 강의에서는 Microchip의 SAME54 Xplained Pro 평가 키트 및 Microsoft Azure IoT를 사용하여 클라우드에 신속하게 연결하는 방법에 대해 배웁니다.

Using Microchip PolarFire® FPGAs in Low Power Applications

Microchip PolarFire® FPGAs offer the industry’s lowest-power FPGA fabric. (June 2021)

TN_Programmable Logic 2021 LV_3

PCIe Fanout and Expansion with Integrated Peripherals

Showing a PCIe Abstraction to real world interfaces with qualification towards industrial use cases (March 2023)

TN_WN Wired Networking TN_WN PCIe

25008 MCU5: Analog MCU Cookbook: Unlocking the Power of Integrated Analog Peripherals (August 2025)

In this class you will learn how integrated analog solutions can improve real-time performance, improve run-time flexibility, reduce costs, and simplify coding through Core Independent Peripherals (CIPs).

auto-registration 2025

25004 MCU1: Getting Started with PIC32C and SAM ARM Cortex-M Microcontrollers (August 2025)

This class will enable you to quickly get started with embedded development using the Microchip ARM® Cortex® M0+, M23, M4 and M33 microcontrollers

auto-registration 2025

PoE 및 IEEE802.3bt 표준 소개

이 과정에서는 PoE(Power over Ethernet)와 PSE(Power Source Equipment) 기술 및 IEEE802.3bt 표준을 소개합니다.

实用I2C: 介绍，实现和故障排除

本课程涵盖了如何使用MPLAB® X 代码配置器(MCC)在8位PIC微控制器上实现I2C协议。

AVR® 周辺機器ディープダイブ

このクラスでは、最も一般的なAVR®周辺機器のアーキテクチャ、セットアップ、デモ、よくあるミスについて深く掘り下げた情報を提供します。より多くの章が毎月追加されます。

리눅스 Yocto 배포: Toaster 소개

Toaster 인터페이스를 사용하여 Yocto 이미지 구성과 빌드

MPASM™에서 MPLAB® XC8 PIC® 어셈블러로 전환

이 강의는 기존의 MPASM™ 프로젝트를 MPLAB® XC8 PIC® 어셈블러로 전환하는 데 도움을 줄 것입니다. 강의는 두 어셈블러 간의 차이점에만 초점을 맞출 것입니다.

TN_Embedded Software

8bit MCU인 PIC과 AVR을 이용하여 주문형 반도체(ASIC) 기능 대체

이 강의에서는 새로운 8비트 주변장치에 대한 개요와 ASIC의 기능을 대체하는 방법과 8비트 MCU를 보다 효과적으로 사용하는 방법에 대한 몇 가지 예를 다루고 있습니다.

TN_Microcontroller System

Microcontroller Applications - Power Conversion

Microchip MCUs and drivers effectively address the challenges of managing varying load conditions, maintaining efficiency, and enabling seamless communication and power sharing in distributed systems.

TN_Power Conversion TN_Microcontroller System auto-registration 2025

Power Supply Design: Advanced Digital Average Current Mode Control

This class covers using the use of Average Current Mode Control (ACMC) in switch-mode power supplies (February 2025)

TA_Experts TA_ESE or FAE TN_Power Conversion TT_MU 2025 New Courses

Controlling Your Embedded IoT Device Using Amazon Alexa

In this training, we will learn how to monitor and control an Embedded device using an Amazon Voice assistant. (June 2021)

2021 TT_MU LV_3 EM_IoT/Edge Computing

Smart Embedded Vision for Intelligent Edge Computing

Martin Kellermann shows how vision based person recognition works and what is required to achieve the technology, aided with clear visions and strategies of Microchip (March 2023)

TA_ESE or FAE TN_Microprocessors EM_IoT/Edge Computing

MPLAB® Code Configurator

MPLAB® Code Configurator (MCC)は簡単にコードが生成できるツールです

TN_Embedded Software TT_Tools

16-Bit Bootloaders Using MCC: Device Side

This class will focus on creating both a generic 16-bit bootloader and a secure 16-Bit bootloader using ECDSA signing features of the ATECC608B for the PIC24/dsPIC33 devices using MPLAB® X IDE and the MPLAB Code Configurator (MCC). (Updated May 2022)

TT_MU 2020 LV_3 TT_Tools

Creating Advanced Embedded Applications with 32-bit MCUs/MPUs using the MPLAB® Harmony v3 Software Framework

This class shows how the MPLAB® Harmony drivers, system services and middleware enables you to rapidly develop bare-metal and RTOS applications. (April 2021)

TN_Microcontroller System TN_Microprocessors 2021 TT_MU TN_Embedded Software LV_5 TT_Tools

WiFi 구동 방법: Harmony 3 Configurator를 사용한 WINC1500 드라이버 설정

이 내용은 Harmony 3 Configurator를 사용하여 새 프로젝트에서 WINC1500 드라이버를 처음부터 구성하는 방법을 보여주는 짧은 자습서입니다.

TN_Embedded Software TT_Tools

Class B Diagnostic Libraries For Functional Safety

Learn how to use software diagnostics in safety critical designs with the help of Microchip’s class B diagnostic library for microcontrollers. (July 2022)

TN_Functional Safety 2022 TT_MU LV_1 EM_Appliances TT_Tools

Design Considerations For Your First IoT Project

Learn the essentials of a connected device within the context of IoT. We explore WiFi, Ethernet, TCP/IP networking and analysis, messaging, provisioning, cloud models and the basics of IoT security. (Jan 2021)

2021 EM_IoT/Edge Computing

Overview of the MPLAB® Code Configurator (MCC) Content Manager (CM)

This course provides basic information on how to navigate and create a new project using the MCC Content Manager. (June 2022)

2022 TN_Embedded Software LV_1 TT_Tools

MCC Melody API Reference for PIC® MCUs

MCC Melody components are the collective name for the provided libraries, drivers, Peripheral Libraries (PLIBs) and Hardware Initializers (HWIs). For select components, the MCC Melody API references now include a “How to use the …” sections, which are a series of use cases. (Jan 2023)

TN_Microcontroller System 2023 LV_3 TT_Tools

Get Started Simplifying Your IoT Design with Azure RTOS

In this class, we will dive into the device-to-cloud journey with Azure RTOS running on a Microchip SAM E54 MCU and connecting to Azure IoT Hub. (July 2021)

2021 TN_Embedded Software LV_3 EM_IoT/Edge Computing

PIC® MCUs 를 위한MCC 멜로디 API Reference

MCC 멜로디 구성은 제공된 라이브러리, 드라이버, 주변장치 라이브러리(PLIBs) 및 하드웨어 초기화 (HWIs) 입니다. 일부 구성 요소에는 "사용 방법" 섹션을 포함하여 MCC 멜로디 API 레퍼런스가 있습니다. 이 강의는 사용 사례의 시리즈입니다.

TN_Microcontroller System

Securely Connecting to AWS IoT Core With The ATECC608B

This course demonstrates the basics for connecting and authenticating with AWS IoT Core. (Nov 2021)

TN_Security 2021 LV_5 EM_IoT/Edge Computing

Agri-IoT LoRa® Agricultural Sensor Node

Bob Martin talks about the Agri-IoT LoRa® Agricultural Sensor Node based on the Arduino Platform (March 2023)

TT_MU TN_Sensor Systems EM_IoT/Edge Computing

Microcontroller Applications - Development Tools

Microchip offers a comprehensive suite of development tools, including a USB Debugger, a Code Trace tool for code analysis, a Power Debugger for power analysis, and a highly capable Simulator for thorough testing.

TN_Microcontroller System auto-registration 2025

Microcontroller Applications - Security

The EU's Cyber Resilience Act (CRA) mandates strict compliance, requiring a revision of design concepts and enhanced security measures.

TN_Microcontroller System TN_Security auto-registration 2025

為您的 MCU/MPU 或 FPGA 選擇正確的計時來源

本課程將指導您通過相關的實用方法來決定 MCU/MPU 或 FPGA 的計時來源。

TN_Microcontroller System TN_Microprocessors TN_Programmable Logic

Provision IoT Devices at Scale from Prototype to Production with Azure Device Provisioning Service

Learn how to do zero touch provisioning to register, configure, and connect your IoT devices to the cloud at scale with Microchip MCUs and Azure IoT using the Azure Device Provisioning Service. (July 2021)

2021 LV_3 EM_IoT/Edge Computing

Build and manage an IoT device with the Microsoft Azure IoT service and the Microchip SAME54 Xplained Pro evaluation kit

Learn how to build a fast-connected cloud using Microchip's SAME54 Xplained Pro evaluation kit and the Microsoft Azure IoT service. (Dec 2020)

TT_MU 2020 LV_3 EM_IoT/Edge Computing

Shining a Light on Artificial Intelligence and Machine Learning

This class will take a journey through artificial intelligence and machine learning and how you can use it in a simple embedded application (Dec 2024)

TA_ESE or FAE LV_5 2024 EM_IoT/Edge Computing

暗号化入門 (Cryptography Primer)

このクラスでは暗号技術の基礎を学ぶことが出来ます。

TN_Security 2020 LV_1

마이크로칩ARM® Cortex® 마이크로컨트롤러 코딩 시작하기

마이크로칩 SAM ARM Cortex M0+, M23, M4 마이크로컨트롤러를 사용하여 코드 작성 및 주변장치를 구동하는 방법에 대해 다룹니다.

MPU System and PCB Design Pitfalls and Solutions

This class will guide you through the hostile terrain of implementing high-speed/high-end MPU devices within an electronic system. (March 2021)

TN_PCB Design and Layout TN_Microprocessors 2021 LV_3

MPLAB® X IDE开发介绍

本课程包含了MPLAB X IDE的基础知识

TN_Embedded Software

为PCIe应用选择定时源

本课程将指导您通过相关的实用方法为PCIe应用选择最佳定时源。

TN_WN Wired Networking TN_WN PCIe

Microcontroller Applications - Functional Safety

Microchip designs new MCUs in compliance with Functional Safety (FuSa) standards and offers FuSa packages, ensuring we address your specific requirements.

TN_Functional Safety TN_Microcontroller System auto-registration 2025

使用 MPLAB ® Harmony v3 周邊函式庫, 實現簡單的嵌入式應用程式

使用 MPLAB ®Harmony v3 周邊函式庫建立 32 位元 MCUs/MPUs 的簡單嵌入式應用程式

2021 TN_Embedded Software

CEC173x Trust Shield

This class will explore the benefits of the CEC173x Trust Shield family, Microchip’s Real-Time Platform Root of Trust solution. (November 2023)

TN_Security 2023 TT_MU LV_1

FreeRTOS Simplified: A Beginner's Guide to Develop and Debug FreeRTOS Applications

This class will help you get started with FreeRTOS applications on Cortex® M4F/M7 devices, using MPLAB® Harmony v3. In addition to basic RTOS concepts, the class emphasizes on common design considerations like task grouping, prioritizing and inter-task communication methods. (Jan 2022)

2022 TN_Embedded Software LV_1

이 과정은 현재 또는 새 제품 설계에 USB 3 하드웨어 인터페이스를 구현하는 데 도움이 됩니다.

TN_WN Wired Networking TN_WN USB

MPLAB® Data Visualizer 를 사용해서 Visual Debugging 하기

이 클래스에서는 MPLAB X IDE의 플러그인 기능을 통해서 MPLAB® Data Visualizer 를 사용할 수 있고, Curiosity Nano Platform 및 XPLAINE PRO 보드를 사용하여 PIC®, AVR® 및 SAM MCU에서 출력되는 실시간 데이터를 확인할 수 있습니다.

2021 TN_Embedded Software LV_1

Microchip and MathWorks - Integrated FIL and IP Core Generation Workflow

Puneet Kuma and Max Bucklin present: Microchip and MathWorks - Integrated FIL and IP Core Generation Workflow (February 2025)

Developing Bootloaders for ARM® Cortex® M0+ MCUs

This class will review the basics of firmware bootloaders and show you how to deploy a bootloader-enabled application on a SAM D21 MCU, using the MPLAB® X IDE and the MPLAB Harmony bootloader library. (October 2023)

TN_Microcontroller System 2023 LV_5

SAM and PIC32 Peripheral Deep Dive

This class presents extensive information on the architecture and configuration of the SAM and PIC32 Peripherals. (Updated April 2025)

TN_Microcontroller System TN_Core Independant Periph LV_3 2025 New Courses

Logic Circuit Design 101 - Microchip Try

Learn how the Custom Logic Block (CLB) works and how to create simple logic circuits. By using the Microchip Try platform, you can upload your code to a remote microcontroller and test your code through the control panel and the livestream. Therefore, this course does not require any purchases of additional hardware. (March 2025)

TA_ESE or FAE TN_Microcontroller System TN_Programmable Logic TT_MU 2025 New Courses

Microcontroller Applications - Graphics

We will highlight the benefits of graphical interaction, simplifying the creation of user-friendly experiences and enabling rapid success in embedded application graphic design.

TN_Microcontroller System TN_Human Interface auto-registration 2025

SmartFusion® 2 FPGA 구성 및 펌웨어 애플리케이션 개발

이 수업에서는 SmartFusion 2 MSS를 구성하는 방법, SmartFusion 2 FPGA 패브릭에 주변 장치를 추가하는 방법, FPGA 설계 흐름을 완료하는 방법, ARM Cortex-M3용 펌웨어 애플리케이션을 개발하는 방법을 보여줍니다.

TN_Programmable Logic

Microcontroller Applications - Motor Control

Our microcontrollers, tools, and libraries can help you develop leading motor control designs with the option to use MATLAB for real-world debugging.

TN_Microcontroller System TN_Motor Control auto-registration 2025

Automate FW testing with MDBCore scripting - Introduction

This course introduces the potential of MDBCore-scripting in automating firmware testing. (December 2023)

TN_Microcontroller System xMPLAB® X TT_MU LV_5 2024

Microcontroller Applications - Connectivity

Microchip offers comprehensive and secure support for a diverse range of communication protocols, including CAN, LIN, USB, TCP, UDP, TSN, BLE, Wi-Fi, and Zigbee, to meet varying application requirements.

TN_Microcontroller System auto-registration 2025

MPLAB® Harmony v3ソフトウェアフレームワークを使用した32ビットMCU/MPUによる高度な組込みアプリケーションの作成

このクラスでは、MPLAB® Harmonyドライバ、システムサービス、ミドルウェアにより、ベアメタルおよびRTOSアプリケーションを迅速に開発する方法を紹介します。

TN_Microcontroller System TN_Microprocessors 2021 TN_Embedded Software

PIC® 및 AVR® MCU에 내장된 아날로그를 이용한 설계

이 교육에서는 아날로그 주변 장치가 내장된 PIC® 및 AVR® 마이크로 컨트롤러를 사용하여 연산 증폭기, ADC, DAC, 전압 기준 및 아날로그 비교기 등의 독립형 아날로그 및 개별 소자들을 갖고 있는 몇 가지의 애플리케이션을 설계하고 최적화할 수 있는 방법을 보여드립니다. (2022년 11월).

TN_Microcontroller System

MPLAB®代码配置器

MPLAB代码配置器(MCC)用于简化的嵌入式软件开发

TN_Embedded Software

MPLAB® X ヒントとコツ

このコースは、コードやプロジェクトを素早く開発するのに役立つMPLAB® X IDEの特定の機能デモに関する一連の短いサンプルで構成されています。

TN_Embedded Software

MPLAB Harmony v3 소프트웨어 프레임 워크를 사용하여 32 비트 MCU/MPU로 고급 임베디드 애플리케이션 만들기

이 강의는 MPLAB® Harmony 드라이버, 시스템 서비스 및 미들웨어를 사용하여 베어메탈 및 RTOS 애플리케이션을 빠르게 개발할 수 있는 방법을 보여줍니다.

TN_Microcontroller System TN_Microprocessors 2021 TN_Embedded Software

Getting Started with MCU Projects using MCC Melody

This course is an overview of the MCC (Microchip Code Configurator) Melody software tool that greatly simplifies the setup of your MCU projects.

TA_ESE or FAE TN_Microcontroller System TT_MU 2025 TT_Tools New Courses

MPU 시스템과 PCB 설계 유의 사항

이 강의에서는 고성능 MPU의 시스템 적용 유의 사항들을 소개합니다.

TN_PCB Design and Layout TN_Microprocessors

Linux Graphics using the Ensemble Graphics Toolkit

In this class you will learn about the structure of the Ensemble Graphics Toolkit (EGT) and how you can use it to create simple graphical applications. (July 2022)

TN_Human Interface 2022 TN_Embedded Software LV_3

25057 IOT2: Simplify Your Next IoT Design with a UART to Cloud controller (August 2025)

This class provides an overview of MQTT-based IoT application architecture

auto-registration 2025

25073 SEC4: Hands-On Security with Secure Elements and HSMs for Embedded Engineers (August 2025)

In this class you will learn the differences between the ATECC608 Secure Element and the PIC32CZ8110CA90 Hardware Security Module, and gain hands-on experience with ECC key generation, AES encryption, secure boot, board-to-board security, X.509 certificates, and TLS 1.3 communication using ECC keys.

auto-registration 2025

25033 AIML4: Easy Computer Vision with MPUs and Edge Impulse (August 2025)

In this course, attendees will gain practical insights into the architecture and capabilities of the 32-bit MPUs and advanced techniques for maintaining and updating machine learning applications.

auto-registration 2025

25005 MCU2: Maximizing Microchip’s Arm® -Based Microcontroller Performance with the Direct Memory Access and Event System Peripherals (August 2025)

Do you want to enhance the performance and bandwidth of your microcontroller designs? This class will teach you how to use the flexible Direct Memory Access Controller (DMAC) and Event System on the Microchip ARM® Cortex® M0+, M23, M4 and M33 microcontrollers.

25014 FPGA3: AI/ML Smart Embedded Vision with with real-time applications using Microchip FPGAs VectorBlox engine and SDK (August 2025)

This class provides a comprehensive understanding of AI/ML using FPGA Smart Embedded Vision solutions and real-time applications.

25062 FUSA1: Introduction to Functional Safety (August 2025)

In this class you will learn the principles and standards of functional safety, including how to identify, assess, and manage risks associated with system failures, understand the safety lifecycle, and implement functional safety measures to prevent and mitigate risks in your projects.

auto-registration 2025

25076 SEC7: Firmware-Over-The-Air Updates made Easy, Secure and Scalable (August 2025)

In this class you will learn secure firmware management for Firmware-Over-The-Air (FOTA) updates, including the challenges of device security, pitfalls of DIY strategies, and professional solutions using Microchip and Kudelski Keystream, with hands-on experience in code signing, regulatory compliance, and deploying updates using the ECC608 TrustManaged device and managed FOTA services.

auto-registration 2025

25046 PCB6: Power Delivery Network (PDN) Design: Fundamentals and Best Practices (August 2025)

This course equips engineers with the skills to design robust PDNs, emphasizing strategic component selection, precise impedance management, and effective noise mitigation for clean power delivery.

auto-registration 2025

25009 MCU6: Low-Power Design with Microchip's Arm Cortex Microcontrollers: Essential Techniques (August 2025)

This class outlines the essential techniques for low-power applications design with Microchip's ARM Cortex microcontrollers including sleep modes, automatic clock request systems, power domains and triggering

auto-registration 2025

25053 ETH5: Introduction to EtherCAT: Unlocking Real-Time Communication in Industrial Networks (Aug 2025)

In this class you will learn about EtherCAT technology, including its architecture, network topology, real-time application examples, and the hardware and software tools for development, with a live demonstration of real-time EtherCAT debugging and troubleshooting to equip you with practical knowledge for designing and debugging EtherCAT systems.

25036 RTOS2: Using Zephyr RTOS on Microchip MCUs (August 2025)

This class will introduce you to the coding environment, SDK, and debug tools available within the Zephyr OS Ecosystem.

auto-registration 2025

25026 FRM7: Microchip Device Firmware Update Ecosystem (August 2025)

This class will provide an overview of the Microchip Device Firmware Update Ecosystem.

auto-registration 2025

25035 RTOS1: Building Real-Time Applications with FreeRTOS (August 2025)

In this class, you will understand the core principles of real-time operating systems (RTOS) and their role in embedded systems.

25055 USB1: Introduction to USB Technology: USB 2.0 Fundamentals, Implementation, and Protocol Analysis (August 2025)

USB 2.0 is a cornerstone of embedded connectivity, but how does it really work? Understanding USB 2.0 is essential for designing and debugging embedded systems.

Environment Sensor Cube

Bob Martin talks about the Environment Sensor Cube based on the Arduino Platform and Microchips AVR-IoT Cellular Mini Evaluation Board (March 2023)

TN_Sensor Systems

Azure IoT Central 을 위한 Sensor Node 만들기

이 수업은 Microsoft Azure 클라우드에 연결되는 IoT Sensor Node 를 만드는 과정에 대해 설명합니다.

TN_Sensor Systems

25081 SENS5: Emerging Techniques in Sensor Data Analysis (August 2025)

This class addresses the limitations of traditional sensor signal processing in machine learning applications.

25020 FRM1: C Programming Tips and Tricks (August 2025)

Move your C programming to an advanced level by avoiding common pitfalls associated with the C Programming Language and learn essential programming concepts and practices.

25024 FRM5: Designing Hardware-Independent APIs for Embedded Systems (August 2025)

This class teaches you how to create hardware-independent APIs for seamless interaction across diverse hardware.

auto-registration 2025

25071 SEC2: Cyber Regulations: Impact on Product Development and Business Risk (August 2025)

In this class you will gain a comprehensive understanding of the evolving cyber legislative landscape and its key requirements, learn essential cyber product design features, understand the impact of cyber risks on business, and practice basic threat modeling techniques to effectively analyze and apply cybersecurity principles for mitigating business risks.

auto-registration 2025

25042 PCB2: A Beginners Guide to Bring-Up Custom PCBs (August 2025)

In this class, you will understand what board bring-up involves and learn effective techniques for designing for testability.

25088 PWR3: Enhancing Converter Performance through Effective PCB Design (August 2025)

This class provides an in-depth look at how PCB layout affects the performance of power converters, tailored for participants with basic knowledge of the topic.

25080 SENS4: Cyborg Lab 101: Signal Acquisition for Biomedical Prosthetic Devices (August 2025)

In this class you will learn the sensing requirements and applications for myoelectric/EMG signals, design and compare analog and digital signal chain topologies, implement a signal chain measurement, and use it for machine learning-based signal classification in biomechanical prosthetic devices.

auto-registration 2025

25069 HMI5: Capacitive Digital Level Sensing for Liquids and more… (August 2025)

In this class you will learn the basic theory behind Microchip’s Digital Level Sensing (DLS) algorithm, how its dual ADC approach eliminates ground shifts and electrical noise, the principles of DLS sensor design and customization, and how to access libraries via SDE, use MPLAB to program the PIC16LF DLS Evaluation kit, and tune the DLS algorithm for your own digital level sensing systems.

auto-registration 2025

25070 SEC1: Introduction to Cryptography: Demystifying the Magic (August 2025)

In this class you will learn key security concepts such as ECC256, SHA256, AES128, MAC, HMAC, CMAC, and RSA, how to identify and implement security requirements in a design, methods for storing and protecting critical keys, and the basic principles of cryptography—including authentication, hashing, signing, and verification—focusing on practical applications of both symmetric and asymmetric cryptography for secure designs.

auto-registration 2025

25018 FPGA7: Simulation and Hardware Debugging for FPGA Designs (August 2025)

The class shows the use of simulation and debug tools within the Microchip Libero® SoC design tool flow and provides additional resources for further learning.

auto-registration 2025

25092 USB2: USB 3.0 & Type-C Explained: Fundamentals, Use Cases, and Debugging (August 2025)

In this class you will gain a comprehensive understanding of USB 3.0 architecture, protocol, power management, and USB Type-C features—including Power Delivery and Alternate Modes—learn to analyze and debug USB communication using a protocol analyzer, and discover how Microchip’s USB 3.0 hubs, bridges, and PD controllers enable scalable, efficient solutions for real-world applications.

auto-registration 2025

25038 ANG1: Reduce noise and improve analog precision Using Microchip's Mindi Simulator (August 2025)

In this class, you will delve into signal conditioning to enhance analog system accuracy and precision using the MPLAB Mindi Analog Simulator.

auto-registration 2025

25063 FUSA2: Functional Safety Hardware Development (August 2025)

In this class you will learn how to design safety-critical hardware with a focus on ISO 26262, including understanding hardware safety requirements, best practices for safety and reliability, hardware design techniques, and how to use vendor-provided safety collateral and built-in safety mechanisms to ensure compliance.

auto-registration 2025

25090 PWR5: Introduction to Power Supply Applications with the new dsPIC33A Digital Signal Controller (August 2025)

In this class you will apply digital power fundamentals to real power supply applications by analyzing the dsPIC33A microcontroller architecture, exploring performance improvements, and seeing practical demonstrations of popular control techniques, gaining a foundational understanding of control theory for digital power systems.

auto-registration 2025

25023 FRM4: Quick Start with MPLAB Harmony for 32-bit MCUs/MPUs (August 2025)

In this hands-on class, you will learn to navigate and manage project settings with MPLAB Code Configurator (MCC), set up and configure peripherals, and generate optimized code tailored to your requirements.

25017 FPGA6: Designing an Application for non-FPGA Engineers using LiberoSOC Design Tools (August 2025)

In this class we expose non-FPGA designers to the capabilities and possibilities of designing with LiberoSOC and the ability to try concepts without a lot of huge time sync for developing the hardware for prototyping.

auto-registration 2025

25021 FRM2: Advanced Embedded C Programming Using Object Oriented Constructs (August 2025)

Take your C programming skills to new heights! This class will show you how to implement object-oriented programming (OOP) concepts using embedded C.

25049 ETH1: Fundamentals of Single Pair Ethernet Standards and their Applications (August 2025)

In this class you will learn the essential features of Single Pair Ethernet standards—from multidrop 10BASE-T1S to multi-Gigabit point-to-point—how they compare to legacy Ethernet and field bus solutions, and the key design considerations, network configurations, and advanced capabilities (such as Precision Time Protocol, Time Sensitive Networks, Power Over Data Line, and security) for successfully migrating to Single Pair Ethernet

auto-registration 2025

25085 MTR4: Developing Motor Control Applications using Model-Based Design (August 2025)

In this class you will learn comprehensive motor control application development using model-based design methodologies, including the use of tools like Scilab to develop, simulate, deploy, and debug models, understand the pros and cons of model-based design, and gain insights into motor system behavior and performance, with a concluding demonstration of a Matlab model.

auto-registration 2025

25079 SENS3: Design and Analysis of Precision Pressure Sensor Systems (August 2025)

In this course, participants will learn how to model a pressure sensor using parameters from the sensor data sheet and then develop and evaluate various topologies to achieve the desired system accuracy.

25072 SEC3: Cracking a Bitcoin Wallet: Hands-On Research (August 2025)

This security class investigates embedded security through a custom board designed to replicate a real Bitcoin hardware wallet

25040 ANG3: RF Signal Chain Solutions Revolutionizing Satellite Communications, 5G, Aerospace and Defense Applications (August 2025)

In this class, you will learn about Microchip RF signal chain solution with PAs, LNAs, switches, transistors, diodes, saw filters, VCSO's revolutionizing Satellite Communications, 5G, Aerospace and Defense applications.

25074 SEC5: Mastering MCU Security: Keeping Your Firmware Safe using an HSM (August 2025)

In this class you will learn how to ensure firmware integrity and authenticity in embedded systems by implementing Secure Boot and Secure Firmware Update using the PIC32CKSG01 Cortex-M4 MCU and its Hardware Security Module (HSM).

auto-registration 2025

25087 PWR2: Analog Control of Switched-Mode Power Supplies: From Fundamentals to Practical Design (August 2025)

This class explores control methods for switched-mode power converters, blending foundational concepts with advanced techniques to provide participants with practical, actionable insights.

25031 AIML2: Dynamic logging with sensor fusion on multiple edge nodes with Stream Analyze Engine (August 2025)

In this course you will learn how to develop models directly on the edge and deploy models to large fleets of edge nodes without the need for firmware updates.

auto-registration 2025

25082 MTR1: High performance motor control using low-cost MCUs (August 2025)

In this class you will learn methodologies and techniques for designing and implementing advanced motor control solutions using affordable microcontrollers, understand the motor control capabilities of low-end MCUs, use Microchip tools for tuning and debugging, and gain hands-on experience developing robust, high-performance motor control systems within budget constraints.

auto-registration 2025

25032 AIML3: Machine Learning and Object Detection with TensorFlow (August 2025)

This session offers a practical introduction to machine learning (ML) and object detection using TensorFlow.

25007 MCU4: Configurable Logic Block Part 2 - Advanced Applications and Practical Labs (August 2025)

This is class 2 of 2 that outline the architecture, applications and tools needed to understand how to utilize the Configurable Logic Block (CLB) peripheral on PIC Microcontrollers.

auto-registration 2025

25013 FPGA2: FPGA design with RISC-V Microcontroller using Libero SoC Tools (August 2025)

In this class, you will gain hands-on experience in implementing a simple FPGA based RISC-V microcontroller with customized memory and peripherals using Libero SoC design tools.

25059 LPW1: Developing Low-Power Wireless Networks with BLE and MiWi (August 2025)

This class introduces you to BLE and MiWi technologies. You will develop a MiWi network for agricultural sensors and create a MiWi to BLE bridge.

25065 HMI1: Innovations in Capacitive touch: the challenging applications that Microchip’s capacitive touch technology can enable (August 2025)

In this class you will learn about Microchip's proprietary touch technology and its new use cases—including moisture resistance, high noise environments, and safety certification—how to use Microchip's tools to minimize development effort, and how to leverage new turn-key and I2C touch parts, as well as maXTouch controllers, to address challenging capacitive touch applications.

auto-registration 2025

25061 LPW3: Thread: A Hands-on Introduction (August 2025)

In this class you will learn how to set up a wireless network using the Thread protocol by building a complete room network with a temperature sensor communicating to a Thread co-processor device, using Microchip's MCC H3 tool for configuration and development, and displaying temperature data on the console, giving you hands-on experience in developing Thread-based wireless networks.

auto-registration 2025

25066 HMI2: How to Easily Create Your First Capacitive Touch Project with MCC Melody (August 2025)

In this class you will learn how to create and tune a capacitive touch project using Microchip's MCUs, MPLAB, MCC Melody, and Data Visualizer, including building a mutual-cap touch project, adding a USART driver to observe sensor responses, and integrating an I2C driver to control the LED driver on the T10 sensor board, giving you practical experience in developing capacitive touch user interfaces.

auto-registration 2025

25067 HMI3: Tuning Capacitive Touch for Challenging Applications (August 2025)

This class will teach you how to use the two-way communication capability of Data Visualizer to demonstrate charge time and sensitivity tuning of touch sensors in a high noise environment.

ATECC608B를 사용하여 AWS IoT Core에 안전하게 연결하기

'이 과정은 AWS IoT Core에 연결하고 인증하는 기본 사항을 보여줍니다.

An Introduction to EtherCAT®, EtherCAT P and the Microchip LAN925x family of Slave Controllers

The class will also explain how EtherCAT can be used for ANY low-cost distributed embedded system that requires high-speed, real-time, time-sensitive networked communication and control. (Jan 2022)

2022 TT_MU LV_1 TN_WN Ethernet

Automate FW testing with MDBCore scripting - MDBCore Interface mdbcs

In this module we cover the mdbcs, a more complex interface into MDBCore. (December 2023)

TN_Microcontroller System xMPLAB® X TT_MU LV_5 2024

10BASE-T1S Single Pair Ethernet System Integration

This class will introduce the 802.3cg short reach 10Mbps Ethernet physical layer standard and the PLCA collision management protocol which allows for efficient multi-drop network implementations. (Nov 2022)

TN_WN Wired Networking 2022 TT_MU LV_1 LV_3 TN_WN Ethernet

An Introduction to Software Defined Industrial Gateway

How to use Microchip Network Processors (NPUs), turnkey software and white boxes for telecom and industrial applications. (Nov 2021)

2021 TT_MU TN_Embedded Software LV_1 EM_Industrial

Alternate Resonators: SAW, MEMS & Atomic

This episode will introduce three common alternatives to quartz oscillators including silicon MEMS, SAW and atomic resonators. (Oct 2022)

2022 TT_MU LV_1

Battery Charging Fundamentals

Battery Chemistries, Terminology, Profiles and Charging Topologies for Real-World Products

TT_MU 2020 LV_1

8-bit PIC® MCU Peripheral Deep Dive

This class presents deep-dive information on the architecture, setup, demonstration and pitfalls of the most common PIC16 and PIC18 peripherals. New chapters will be added as they become available. (Updated July 2025))

TN_Microcontroller System 2022 2023 TT_MU LV_3

Intro to Op-Amps Part 3: Open/Closed Loop Operation

This text-based training explains the basic areas of op-amp open- and closed-loop responses. (Aug 2023)

Oscillators: XOs, TXCOs and VCXOs

This course covers basic crystal oscillators, temperature-compensated oscillators and voltage-controlled oscillators. (Oct 2022)

TN_Clock and Timing 2022 LV_1

Surviving the Extremes - Oscillators for Shock, Vibration and Temperature

This class covers the design approaches and construction techniques used to develop oscillators that can withstand shock, vibration and wide temperature ranges. (Oct 2022)

TN_Clock and Timing 2022 LV_1

Simple Applications Using the MPLAB® Harmony v3 Peripheral Libraries

Creating Simple Embedded Applications with 32-bit MCUs/MPUs using the MPLAB® Harmony v3 Peripheral Libraries. (May 2021)

2021 TN_Embedded Software LV_5 TT_Tools

Characterizing SiC MOSFET Switching Losses with Double Pulse Test (DPT)

This video shows how to measure switching losses using the Double Pulse Test (DPT)

TA_ESE or FAE TN_Power Conversion TT_MU TN_SiC LV_5 2024

Asymmetric Authentication with the ECC608 and ECC204

This class covers how Microchip’s Secure Element devices can provide Asymmetric Authentication for securely establishing device, manufacturer and root identities. (Oct 2024)

TA_ESE or FAE TN_Security TT_MU LV_3 2024

Creating a Sensor Node for Azure IoT Central

This class will help you create a proof-of-concept IoT sensor node which connects to the Microsoft Azure Cloud. (Nov 2022)

2022 TT_MU TN_Sensor Systems LV_1 EM_IoT/Edge Computing

Secure Boot with the CEC1712 and Soteria G2

Explore the benefits of a platform root of trust and describe how Microchip supports this with the CEC1712 microcontroller and Soteria code. (Dec 2021)

TN_Security 2021 LV_3

Capacitive Touch Design: Getting Started with Touch using Microchip Code Configurator (MCC) Melody

In this course we will use MPLAB® X, MCC Melody, and Microchip Touch libraries to create a capacitive touch project with buttons and a slider. (July 2023)

TN_Human Interface TT_MU TN_Embedded Software TT_Tools

Building your Linux Development System

How to create a development system capable of building Linux solutions for Microchip MPUs. (Dec 2020)

TT_MU TN_Embedded Software 2020 LV_3

ARM® Cortex®-M Architecture Overview

This course covers the architectural differences of the Cortex-M cores and will help you select which device is the best choice for your own application. (Sept 2022)

2022 TT_MU LV_1

Intro to Op-Amps Part 4: Integrators, Differentiators, Converters and Filters

This text-based training explains operational amplifier (op-amp) Integrators, Differentiators, Converters and Filters. (Aug 2023)

Intro to Op-Amps Part 5: Oscillators and Instrumentation Amplifiers

This text-based training explains the operational amplifier (op-amp) used in Oscillator and Instrumentation Amplifier Circuits. (Aug 2023)

TA_Experts TN_Clock and Timing

CAN and CAN FD Protocol and Physical Layer Basics

The course will teach you the CAN and CAN FD protocol and physical layer basics. (Dec 2020)

TN_WN Wired Networking TT_MU 2020 LV_1 TN_WN CAN

Configuring a SmartFusion® 2 FPGA and Developing Firmware Applications

This class shows you how to configure the SmartFusion 2 MSS, add peripherals in the SmartFusion 2 FPGA fabric, complete the FPGA design flow and develop firmware applications for the ARM Cortex-M3. (Nov 2022)

TN_Programmable Logic 2022 TT_MU

Advanced C Programming

This course covers many advanced concepts of the C programming language for embedded applications. (June 2021)

2021 TT_MU TN_Embedded Software LV_3

First Steps into Bluetooth Low Energy (BLE)

This class will highlight the fundamental concepts needed to design BLE-capable devices and discuss connectivity and data transfer. (Nov 2021)

Syntax And Structure of C - Simply C

Fundamentals of the C Programming Language. (March 2021)

Ethernet Switch Fundamentals

In this course we will explore Ethernet switches and how they can be designed into embedded applications. We'll explore how switches work and look at key Switch features and interface options, which should be considered when selecting a Switch IC. (July 2022)

TN_WN Wired Networking 2022 LV_3 TN_WN Ethernet

USB2 Hub Fundamentals

How to design-in a USB2 hub into your application and perform basic testing and debugging of the design. (Jan 2022)

TN_WN Wired Networking 2022 TN_WN USB LV_1

How to WiFi: Configuring the WINC1500 driver with the Harmony 3 Configurator

This is a short tutorial showing how to use the Harmony 3 Configurator to configure the WINC1500 driver from scratch in a new project. (Jan 2022)

2022 TN_Embedded Software LV_3 TT_Tools

High Side Current Sensing with the MCP6V51 Zero-drift Opamp

Showing a High Side Current Sensing Design Implementation for System Voltages up to 45 Volts. (Oct 2021)

2021 TN_Sensor Systems LV_3

Getting Started with Microchip FPGAs. (Dec 2020)

TN_Programmable Logic 2020 LV_1

Intro to Op-Amps Part 2: Positive and Negative Feedback Circuits

This text-based training covers positive and negative feedback op-amp circuits operation. (Aug 2023)

Crystal Oscillators: Phase Noise and Short-Term Stability

In this course we cover phase noise and how it consists of different noise sources between the crystal and the electronics. This discussion will consist of topics such as frequency and time domain, power law, short-term stability and noise mitigation. (May 2023)

TN_Clock and Timing LV_1

Introduction to Quartz Crystals

This course provides a detailed overview of piezoelectric effect, resonator structures, cuts, vibration modes and overtones. (Oct 2022)

Crystal Oscillators: Challenges And Sources Of Error

This class dives into the common challenges and compromises when designing quartz oscillators. (Feb 2023)

TN_Clock and Timing 2023 LV_1

Electromagnetic Compatibility (EMC) Part 4 - Shielding

In this course we cover shielding walls and their effectiveness at different frequencies, radiators in the far field and in the near field and how to avoid loops when dealing with shielded cable. (November 2023)

TN_Analog 2023 TT_MU LV_3

Electromagnetic Compatibility (EMC) Part 2 - Supply Voltage Decoupling

This course covers cover the basics of resonance circuits, the use of decoupling components and the use of inductors and ferrite beads for DC decoupling. (November 2023)

TN_Analog 2023 TT_MU LV_3

Electromagnetic Compatibility (EMC) Part 3 - Signal Transmission and Grounding

In this class we dive into the details of signal transmission lines and grounding including types of signal coupling and reflections on transmission lines and the effects on PCB traces. (November 2023)

TN_Analog 2023 TT_MU TN_Sensor Systems LV_3

25098 PCIe1: Fundamentals of PCIe (August 2025)

In this class you will learn PCIe fundamentals, key features, and its importance in modern computing, gain hands-on experience debugging PCIe issues using Microchip’s free Chiplink tool, and see practical demonstrations of reliable PCIe links between boards, cables, and backplanes for real-world applications.

auto-registration 2025

25102 PCB9: PCB Design and Verification for Cyber Resilience Act (CRA) Compliance (August 2025)

In this class you will learn how modern PCB design software supports compliance with the Cyber Resilience Act (CRA) by implementing security constraints, automated vulnerability checks, and integrated electrical and thermal simulations to ensure robust, resilient, and secure hardware designs for connected IoT applications. No online material!

auto-registration 2025

25100 PCB7: From Discovery to Production – a Modern Design Journey (August 2025)

In this class, we’ll take you on a fast-paced journey from early tech discovery all the way to manufacturing—showcasing powerful new tools and techniques that are reshaping how engineers design and deliver hardware. No online material!

auto-registration 2025

25101 PCB8: Accelerating Microchip based Power Electronics Design Using Siemens EDA Tools (August 2025)

This class demonstrates how today’s integrated design and verification solutions enable engineers to create more efficient PCB designs. No online material!

auto-registration 2025

25060 LPW2: BLE Made Easy (August 2025)

In this class you will learn how to develop with the RNBD BLE module by building a simple data application using MCC and drivers, creating a link to a mobile application, and gaining practical experience to easily develop BLE applications.

auto-registration 2025

25052 ETH4: The Clock is Ticking on Time Sensitive Networking (August 2025)

In this class you will learn the fundamentals of Time-Sensitive Networking (TSN), its benefits, and how TSN sub-standards extend Ethernet to provide determinism, control, and robustness for industrial network applications.

auto-registration 2025

25089 PWR4: Fundamentals of Digital Power Supply Control (August 2025)

In this class you will learn digital control techniques for switch-mode power supplies, including analyzing plant transfer functions, designing and tuning software-based digital feedback loops, understanding discrete and continuous time domain interactions, and applying compensation coefficients for adaptive control, equipping you to implement and optimize digital control in power supply systems.

auto-registration 2025

25091 PWR6: Fundamentals of Digital Power Model Based Design with MATLAB/Simulink (August 2025)

In this class you will learn to integrate MATLAB and Simulink with MPLAB IDE to generate and deploy real-time C code for Microchip dsPIC DSCs, including Power Factor Correction (PFC) development, using device blocksets and both Microchip and MathWorks tools.

auto-registration 2025

25093 PWR8: Multilevel AC/DC Power Supply Design Review (August 2025)

In this expert-level class you will review the design of a 5.5kW AC/DC power supply using a 4-level Flying Capacitor Multi-Level (FCML) Totem-Pole-Bridgeless Power Factor Correction (PFC) stage and a 4-level LLC Resonant DC/DC Converter, comparing conventional and multilevel architectures, and exploring design aspects like node driver design, control signal distribution, and non-linear control system implementation.

auto-registration 2025

25094 PWR9: Why Silicon Carbide (SiC), Why Now? (August 2025)

In this class you will explore the advantages of Silicon Carbide (SiC) over traditional silicon in high voltage, high power applications, compare power stage designs and switching losses of SiC MOSFETs, Si MOSFETs, and Si IGBTs through live tests, and learn to use the MPLAB SiC Power Simulator to analyze and implement SiC technology in power stages.

auto-registration 2025

25099 SEC8: Cyber Resilience Act (August 2025)

In this class you will learn how to design embedded products for hostile cyber environments by implementing features such as Key Management, Secure Boot, Vulnerability Management, Threat and Risk Analysis, SBoM, and Threat Modeling, while understanding new regulatory requirements for availability, authenticity, integrity, and confidentiality, and mastering the processes needed for secure, cyber resilient products.

auto-registration 2025

25002 PNS2: Microchip Is... Analog, Power, Silicon Carbide, Discrete, and Timing Products (August 2025)

This class provides an overview of Microchip's latest Analog, Power, Silicon Carbide, Discrete, and Timing products.

25011 MCU8: PIC64 GX: The King of Real-Time Processing (August 2025)

This course will introduce the PIC64 GX SoC architecture

auto-registration 2025

25028 LNX2: Creating Feature-Rich Linux Applications (August 2025)

In this class you will learn about the fundamental precepts of Linux application structure in order to help you decide upon an effective system architecture for your application.

auto-registration 2025

25029 LNX3: Developing Asymmetric Multi-Processing (AMP) Systems with Linux and Zephyr (August 2025)

In this class, you will create a Asymmetric Multi-Processing (AMP) system with specified cores dedicated to Linux and an alternative OS (Zephyr).

auto-registration 2025

25030 AIML1: Shining a Light on AIML: An Introduction to Machine Learning (August 2025)

This class introduces the Microchip Machine Learning Development tool.

auto-registration 2025

25037 RTOS3: Building Applications using the Zephyr State Machine Framework (August 2025)

This class will guide you through the Zephyr State Machine Framework, focusing on its architecture, core components, and efficient design of state-driven systems.

auto-registration 2025